SMC 1/2 in FRL, Automatic Drain, 5 μm Filtration Size
- N° de stock RS:
- 885-5937
- Référence fabricant:
- AC40D-F04D-B
- Fabricant:
- SMC
Actuellement indisponible
Désolés, nous ne savons pas quand ce produit sera réapprovisionné.
Produit de remplacement
Ce produit n'est pas disponible actuellement. Voici notre produit de remplacement:
la pièce
165,84 €
(TVA exclue)
200,67 €
(TVA incluse)
- N° de stock RS:
- 885-5937
- Référence fabricant:
- AC40D-F04D-B
- Fabricant:
- SMC
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SMC | |
| Product Type | FRL | |
| Port Size | 1/2 in | |
| Drain Type | Automatic | |
| Series | AC | |
| Filtration Size | 5μm | |
| Pressure Gauge Port Size | 1/8 in | |
| Minimum Operating Temperature | -5°C | |
| Maximum Operating Temperature | 60°C | |
| Maximum Operating Pressure | 1 Mpa | |
| Standards/Approvals | No | |
| Bowl Material | Polycarbonate | |
| Pressure Setting Range | 0.05 to 0.7 Mpa | |
| Sélectionner tout | ||
|---|---|---|
Marque SMC | ||
Product Type FRL | ||
Port Size 1/2 in | ||
Drain Type Automatic | ||
Series AC | ||
Filtration Size 5μm | ||
Pressure Gauge Port Size 1/8 in | ||
Minimum Operating Temperature -5°C | ||
Maximum Operating Temperature 60°C | ||
Maximum Operating Pressure 1 Mpa | ||
Standards/Approvals No | ||
Bowl Material Polycarbonate | ||
Pressure Setting Range 0.05 to 0.7 Mpa | ||
Non conforme
Combination Filter- Regulator - Separator, AC-B series
Combination FR Units with a mist separator from SMC. This range is designed to allow users the flexibility to pick a combination of pneumatic air preparation equipment to suit your installation. The mist separator with these units can filter particles down to a size of 0.3μm and remove 99.9% of contaminates (at filtered size). The AC range has been designed with a high flow rate and excellent durability. AC pneumatic fittings are easy to install and smaller than previous versions.
Transparent Bowl means condensate level can be viewed from any angle.
Resin body will not rust
One piece bowl and element for easier element replacement
Improved pressure drop over previous series
Transparent bowl guard
Different pressure settings available to meet different application needs
Modular design
Liens connexes
- SMC 1/2 in FRL 5 μm Filtration Size
- SMC 1/2 in FRL Assembly 5 μm Filtration Size Integrated Pressure Gauge
- SMC 3/4 in FRL 5 μm Filtration Size
- SMC G 1/2 Filter/Regulator/Lubricator Assembly 5 μm Filtration Size Integrated Pressure Gauge,
- SMC 1/8 in FRL 5 μm Filtration Size Integrated Pressure Gauge
- SMC 3/8 in FRL 5 μm Filtration Size Integrated Pressure Gauge
- SMC 1/2 in FRL 5 μm Filtration Size Integrated Pressure Gauge
- SMC G 1/4 Filter Regulator 5 μm Filtration Size Integrated Pressure Gauge, AF30-F02-D