Telemecanique Sensors Plastic Fibre Optic Sensor 18 mm, IP64, IP641
- N° de stock RS:
- 281-1600
- Référence fabricant:
- XUFN01321
- Fabricant:
- Telemecanique Sensors
Sous-total (1 unité)*
64,44 €
(TVA exclue)
77,97 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 11 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 64,44 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 281-1600
- Référence fabricant:
- XUFN01321
- Fabricant:
- Telemecanique Sensors
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Telemecanique Sensors | |
| Detection Range | 18 mm | |
| Fibre Optic Type | Plastic | |
| IP Rating | IP64, IP641 | |
| Housing Material | PE | |
| Minimum Operating Temperature | -25°C | |
| Maximum Operating Temperature | +60°C | |
| Sélectionner tout | ||
|---|---|---|
Marque Telemecanique Sensors | ||
Detection Range 18 mm | ||
Fibre Optic Type Plastic | ||
IP Rating IP64, IP641 | ||
Housing Material PE | ||
Minimum Operating Temperature -25°C | ||
Maximum Operating Temperature +60°C | ||
Statut RoHS : Exempté
Fibre Optic Light Guides for XUD Amplifiers
The diffuse scan types have figure of eight cross section cables which terminate in a round cross section at the sensing face. There are 2 core strands at the detector face.
Thru beam light guides (stock nos. 324-1636 and 281-1622) can be fitted with an optional lens (stock no. 324-1664) for increased sensing distances. (up to 400mm for 324-1636 and up to 1500mm for 281-1622)
The sensing distance of 200mm for stock no. 513-5549 is the maximum sensing distance. The distance is determined by the length the fibre is cut to
Operating temperature -25°C to +60°C
Thru beam light guides (stock nos. 324-1636 and 281-1622) can be fitted with an optional lens (stock no. 324-1664) for increased sensing distances. (up to 400mm for 324-1636 and up to 1500mm for 281-1622)
The sensing distance of 200mm for stock no. 513-5549 is the maximum sensing distance. The distance is determined by the length the fibre is cut to
Operating temperature -25°C to +60°C
Note


Liens connexes
- Telemecanique Plastic Fibre Optic Sensor 50 mm IP641
- Telemecanique Sensors Plastic Fibre Optic Sensor 200 mm IP641
- Telemecanique Sensors Plastic Fibre Optic Sensor 70 mm IP641
- Telemecanique Sensors Plastic Fibre Optic Sensor 30 mm IP641
- Telemecanique Sensors Plastic Fibre Optic Sensor 50 mm IP641
- Telemecanique Sensors Plastic Fibre Optic Sensor 300 mm IP641
- Panasonic Plastic Fibre Optic Sensor 450 mm, IP64
- Telemecanique Sensors Fibre Trimmer for Use with Plastic optic fibre
