Broadcom HFBR-2522Z 1 MBd 660 nm Fibre Optic Receiver, Square, Duplex Connector

Sous-total (1 tube de 200 unités)*

1 866,40 €

(TVA exclue)

2 258,40 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
Informations sur le stock actuellement non accessibles - Veuillez vérifier plus tard
Unité
Prix par unité
le tube*
200 +9,332 €1 866,40 €

*Prix donné à titre indicatif

N° de stock RS:
189-4847
Référence fabricant:
HFBR-2522Z
Fabricant:
Broadcom
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Broadcom

Maximum Data Rate

1MBd

Product Type

Fibre Optic Receiver

Connector Shape

Square

Wavelength of Peak Sensitivity

660nm

Typical Rise Time

80ns

Typical Fall Time

40ns

Number of Pins

6

Mount Type

Through Hole

Connector Type

Duplex

Maximum Data Transmission Distance

55m

Length

18.8mm

Height

7.62mm

Standards/Approvals

RoHS

Width

10.16mm

Output Signal Type

TTL

Series

Versatile Link

Broadcom Versatile Link Series Fibre Optic Receiver, 55m Maximum Data Transmission Distance, 1MBd Maximum Data Rate - HFBR-2522Z


This fibre-optic receiver converts incoming optical signals into TTL electrical output for short-distance links. It is intended for through-hole PCB mounting in systems requiring a duplex, square-shaped connector Interface and is suitable for installations compliant with RoHS.

Features and Benefits:


• 660 nm Peak sensitivity enables detection of red-wavelength signals
• TTL output facilitates direct logic-level interfacing
• 1 Mbaud maximum data rate suits low-speed communication
• 80 ns rise time and 40 ns fall time provide responsive signal edges
• 6-pin configuration supports Compact circuit integration

Applications


• Suitable for duplex optical interconnects on control boards
• Ideal for short-range sensor data links within 55 m
• Used with industrial through-hole assemblies requiring RoHS
• Can be used for TTL-level signalling in laboratory equipment

What mounting method is required for PCB assembly?


It is designed for through-hole mounting to secure the connector to the board.

How many electrical connections must the PCB accommodate?


The device uses six pins that require corresponding PCB holes and traces.

What connector geometry must mating hardware match?


Mating parts must accept a square duplex connector shape.

What is the maximum reliable transmission distance?


The receiver supports signal reception up to 55 m over suitable fibre.

Which signal characteristics define its temporal response?


Typical switching behaviour is 80 ns for rising edges and 40 ns for falling edges.

Liens connexes

Soyez le/la premier·ère à être informé de nos nouveautés produits et de nos offres spéciales.

adresse e-mail

Les données personnelles que vous nous fournissez en vous inscrivant à cette liste de diffusion seront traitées conformément à notre politique de confidentialité.