Murata Ferrite Bead 850 μm (Surface) (0805) (Chip Ferrite Bead), 1500 Ω impedance at 100 MHz
- N° de stock RS:
- 724-1510
- Référence fabricant:
- BLM21BD152SN1D
- Fabricant:
- Murata
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 724-1510
- Référence fabricant:
- BLM21BD152SN1D
- Fabricant:
- Murata
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Murata | |
| Package Type | 0805 | |
| Product Type | Ferrite Bead | |
| Packaging | Tape & Reel | |
| Impedance at 100 MHz | 1500Ω | |
| Current Rating | 200mA | |
| Mount Type | Surface | |
| Sub Type | Chip Ferrite Bead | |
| Minimum Operating Temperature | -55°C | |
| Maximum Operating Temperature | 125°C | |
| Depth | 1.25mm | |
| Height | 850μm | |
| Maximum DC Resistance | 450mΩ | |
| Standards/Approvals | RoHS, REACH | |
| Length | 2mm | |
| Automotive Standard | No | |
| Application | High Speed Signal Lines, EMI Suppression Filter | |
| Series | BLM21BD | |
| Material | Ferrite | |
| Sélectionner tout | ||
|---|---|---|
Marque Murata | ||
Package Type 0805 | ||
Product Type Ferrite Bead | ||
Packaging Tape & Reel | ||
Impedance at 100 MHz 1500Ω | ||
Current Rating 200mA | ||
Mount Type Surface | ||
Sub Type Chip Ferrite Bead | ||
Minimum Operating Temperature -55°C | ||
Maximum Operating Temperature 125°C | ||
Depth 1.25mm | ||
Height 850μm | ||
Maximum DC Resistance 450mΩ | ||
Standards/Approvals RoHS, REACH | ||
Length 2mm | ||
Automotive Standard No | ||
Application High Speed Signal Lines, EMI Suppression Filter | ||
Series BLM21BD | ||
Material Ferrite | ||
Statut RoHS : Exempté
- Pays d'origine :
- JP
SMD 0805 Ferrite Filters- BLM21B Series
The BLM series of ferrite beads from Murata do not require a ground connection and are Ideal for use in circuits with unstable ground lines. At noise frequencies, these ferrite beads are designed to function nearly as resistors, leaving signal wave forms undistorted and reducing the possibility of resonance. The nickel barrier construction of the external electrodes enables excellent solder heat protection.
BLM_P variants feature low DC resistance and are Ideal for high current circuits.
This series of ferrite beads are designed for general use applications.
Liens connexes
- Murata Ferrite Bead 850 μm (Surface) (0805) (Chip Ferrite Bead), 1500 Ω impedance at 100 MHz
- Murata Ferrite Bead 850 μm (Chip) (0805) (Chip Ferrite Bead), 30 Ω impedance at 100 MHz
- Murata Ferrite Bead 850 μm (Chip) (0805) (Chip Ferrite Bead), 330 Ω impedance at 100 MHz
- Murata Ferrite Bead 850 μm 1.25 mm (Chip Ferrite Bead) (Chip Ferrite Bead), 420 Ω impedance at 100 MHz
- Murata Ferrite Bead 800 μm (Surface) (0603) (Chip Ferrite Bead) 1500 Ω impedance at 1 GHz
- Murata Ferrite Bead 850 μm (Surface) (0805) (Chip Ferrite Bead), 470 Ω impedance at 100 MHz
- Murata Ferrite Bead 850 μm (Surface) (0805) (Chip Ferrite Bead), 330 Ω impedance at 100 MHz
- Murata Ferrite Bead 850 μm (Surface) (0805) (Chip Ferrite Bead), 1000 Ω impedance at 100 MHz