Murata Ferrite Bead 850 μm (Surface) (0805) (Chip Ferrite Bead), 78.9 Ω impedance at 25 MHz, 150 Ω impedance at 100 MHz,
- N° de stock RS:
- 223-4972
- Référence fabricant:
- BLM21AG151BH1D
- Fabricant:
- Murata
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 223-4972
- Référence fabricant:
- BLM21AG151BH1D
- Fabricant:
- Murata
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Murata | |
| Package Type | 0805 | |
| Product Type | Ferrite Bead | |
| Impedance at 25 MHz | 78.9Ω | |
| Impedance at 50 MHz | 109Ω | |
| Packaging | Tape & Reel | |
| Impedance at 100 MHz | 150Ω | |
| Impedance at 300 MHz | 165Ω | |
| Impedance at 1 GHz | 120Ω | |
| Current Rating | 10mA | |
| Mount Type | Surface | |
| Sub Type | Chip Ferrite Bead | |
| Minimum Operating Temperature | -55°C | |
| Maximum Operating Temperature | 150°C | |
| Depth | 1.25mm | |
| Height | 850μm | |
| Standards/Approvals | REACH, RoHS | |
| Length | 2mm | |
| Maximum DC Resistance | 0.09Ω | |
| Application | General Purpose, EMI Suppression Filter | |
| Automotive Standard | AEC-Q200 | |
| Series | BLM21 | |
| Material | Ferrite | |
| Sélectionner tout | ||
|---|---|---|
Marque Murata | ||
Package Type 0805 | ||
Product Type Ferrite Bead | ||
Impedance at 25 MHz 78.9Ω | ||
Impedance at 50 MHz 109Ω | ||
Packaging Tape & Reel | ||
Impedance at 100 MHz 150Ω | ||
Impedance at 300 MHz 165Ω | ||
Impedance at 1 GHz 120Ω | ||
Current Rating 10mA | ||
Mount Type Surface | ||
Sub Type Chip Ferrite Bead | ||
Minimum Operating Temperature -55°C | ||
Maximum Operating Temperature 150°C | ||
Depth 1.25mm | ||
Height 850μm | ||
Standards/Approvals REACH, RoHS | ||
Length 2mm | ||
Maximum DC Resistance 0.09Ω | ||
Application General Purpose, EMI Suppression Filter | ||
Automotive Standard AEC-Q200 | ||
Series BLM21 | ||
Material Ferrite | ||
- Pays d'origine :
- JP
The Murata BLM21AG series chip ferrite bead is designed to function nearly as a resistor at noise frequencies, which greatly reduces the possibility of resonance and leaves signal wave forms undistorted. It is effective in circuits without stable ground lines. It can be used in high current circuits due to its low DC resistance.
Nickel barrier structure of the external electrodes provides excellent solder heat resistance
Operating temperature range from -55 °C to 125 °C
Does not need a connection to ground
Liens connexes
- Murata Ferrite Bead 850 μm (Surface) (0805) (Chip Ferrite Bead) 150 Ω impedance at 100 MHz,
- Murata Ferrite Bead 850 μm (Surface) (0805) (Chip Ferrite Bead) 220 Ω impedance at 100 MHz,
- Murata Ferrite Bead 850 μm (Surface) (0805) (Chip Ferrite Bead) 30 Ω impedance at 100 MHz,
- Murata Ferrite Bead 850 μm (Surface) (0805) (Chip Ferrite Bead) 330 Ω impedance at 100 MHz,
- Murata Ferrite Bead 850 μm (Surface) (0805) (Chip Ferrite Bead) 600 Ω impedance at 100 MHz,
- Murata Ferrite Bead 850 μm (Surface) (0805) (Chip Ferrite Bead) 60 Ω impedance at 100 MHz,
- Murata Ferrite Bead 850 μm (Surface) (0805) (Chip Ferrite Bead) 1000 Ω impedance at 100 MHz,
- Murata Ferrite Bead 850 μm (Surface) (0805) (Chip Ferrite Bead) 120 Ω impedance at 100 MHz,