Murata Ferrite Bead 0.5 mm (Surface) (0402) (Chip Ferrite Bead), 29.6 Ω impedance at 25 MHz, 80 Ω impedance at 100 MHz,
- N° de stock RS:
- 223-4887
- Référence fabricant:
- BLM15PE800SH1D
- Fabricant:
- Murata
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 223-4887
- Référence fabricant:
- BLM15PE800SH1D
- Fabricant:
- Murata
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Murata | |
| Package Type | 0402 | |
| Product Type | Ferrite Bead | |
| Impedance at 25 MHz | 29.6Ω | |
| Impedance at 50 MHz | 55.1Ω | |
| Packaging | Tape & Reel | |
| Impedance at 100 MHz | 80Ω | |
| Impedance at 300 MHz | 123Ω | |
| Impedance at 1 GHz | 118Ω | |
| Current Rating | 1A | |
| Sub Type | Chip Ferrite Bead | |
| Mount Type | Surface | |
| Minimum Operating Temperature | -55°C | |
| Maximum Operating Temperature | 125°C | |
| Standards/Approvals | REACH, RoHS | |
| Length | 1mm | |
| Height | 0.5mm | |
| Maximum DC Resistance | 70mΩ | |
| Depth | 0.5mm | |
| Application | EMI Suppression Filter, DC Power Line | |
| Material | Ferrite | |
| Automotive Standard | AEC-Q200 | |
| Series | BLM15 | |
| Sélectionner tout | ||
|---|---|---|
Marque Murata | ||
Package Type 0402 | ||
Product Type Ferrite Bead | ||
Impedance at 25 MHz 29.6Ω | ||
Impedance at 50 MHz 55.1Ω | ||
Packaging Tape & Reel | ||
Impedance at 100 MHz 80Ω | ||
Impedance at 300 MHz 123Ω | ||
Impedance at 1 GHz 118Ω | ||
Current Rating 1A | ||
Sub Type Chip Ferrite Bead | ||
Mount Type Surface | ||
Minimum Operating Temperature -55°C | ||
Maximum Operating Temperature 125°C | ||
Standards/Approvals REACH, RoHS | ||
Length 1mm | ||
Height 0.5mm | ||
Maximum DC Resistance 70mΩ | ||
Depth 0.5mm | ||
Application EMI Suppression Filter, DC Power Line | ||
Material Ferrite | ||
Automotive Standard AEC-Q200 | ||
Series BLM15 | ||
- Pays d'origine :
- JP
The Murata BLM15PE series chip ferrite bead is designed to function nearly as a resistor at noise frequencies, which greatly reduces the possibility of resonance and leaves signal wave forms undistorted. It is effective in circuits without stable ground lines. It can be used in high current circuits due to its low DC resistance. It has impedance of 80 ohm.
Nickel barrier structure of the external electrodes provides excellent solder heat resistance
Operating temperature range from -55 °C to 125 °C
Does not need a connection to ground
Liens connexes
- Murata Ferrite Bead 0.5 mm (Surface) (0402) (Chip Ferrite Bead) 80 Ω impedance at 100 MHz,
- KEMET Ferrite Bead (Tape & Reel) (Chip Bead) 120 Ω impedance at 100 MHz, 321 Ω impedance at
- KEMET Ferrite Bead (Tape & Reel) (Chip Bead) 80 Ω impedance at 100 MHz, 85.8 Ω impedance at
- Murata Ferrite Bead 0.6 mm (0603) (Chip Ferrite Bead) 8.5 Ω impedance at 100 MHz, 19.8 Ω
- Murata Ferrite Bead 0.85 mm (Surface) (0805) (Chip Ferrite Bead) 600 Ω impedance at 100 MHz,
- Murata Ferrite Bead 0.5 mm (Surface) (0402) (Chip Ferrite Bead) 1.5 Ω impedance at 100 MHz,
- Murata Ferrite Bead 0.3 mm (Surface) (0201) (Chip Ferrite Bead) 600 Ω impedance at 100 MHz,
- Murata Ferrite Bead 0.8 mm (Surface) (0603) (Chip Ferrite Bead) 100 Ω impedance at 100 MHz,