Murata Ferrite Bead 500 μm (Surface) (0402) (Chip Ferrite Bead), 12.3 Ω impedance at 25 MHz, 30 Ω impedance at 100 MHz,
- N° de stock RS:
- 223-4878P
- Référence fabricant:
- BLM15PE300SH1D
- Fabricant:
- Murata
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 223-4878P
- Référence fabricant:
- BLM15PE300SH1D
- Fabricant:
- Murata
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Murata | |
| Package Type | 0402 | |
| Product Type | Ferrite Bead | |
| Impedance at 25 MHz | 12.3Ω | |
| Impedance at 50 MHz | 21.5Ω | |
| Packaging | Tape & Reel | |
| Impedance at 100 MHz | 30Ω | |
| Impedance at 300 MHz | 40.9Ω | |
| Impedance at 1 GHz | 53.5Ω | |
| Current Rating | 1.4A | |
| Sub Type | Chip Ferrite Bead | |
| Mount Type | Surface | |
| Minimum Operating Temperature | -55°C | |
| Maximum Operating Temperature | 125°C | |
| Height | 500μm | |
| Depth | 500μm | |
| Length | 1mm | |
| Standards/Approvals | REACH, RoHS | |
| Maximum DC Resistance | 35mΩ | |
| Application | EMI Suppression Filter, DC Power Line | |
| Automotive Standard | AEC-Q200 | |
| Material | Ferrite | |
| Series | BLM15 | |
| Sélectionner tout | ||
|---|---|---|
Marque Murata | ||
Package Type 0402 | ||
Product Type Ferrite Bead | ||
Impedance at 25 MHz 12.3Ω | ||
Impedance at 50 MHz 21.5Ω | ||
Packaging Tape & Reel | ||
Impedance at 100 MHz 30Ω | ||
Impedance at 300 MHz 40.9Ω | ||
Impedance at 1 GHz 53.5Ω | ||
Current Rating 1.4A | ||
Sub Type Chip Ferrite Bead | ||
Mount Type Surface | ||
Minimum Operating Temperature -55°C | ||
Maximum Operating Temperature 125°C | ||
Height 500μm | ||
Depth 500μm | ||
Length 1mm | ||
Standards/Approvals REACH, RoHS | ||
Maximum DC Resistance 35mΩ | ||
Application EMI Suppression Filter, DC Power Line | ||
Automotive Standard AEC-Q200 | ||
Material Ferrite | ||
Series BLM15 | ||
- Pays d'origine :
- JP
The Murata BLM15PE series chip ferrite bead is designed to function nearly as a resistor at noise frequencies, which greatly reduces the possibility of resonance and leaves signal wave forms undistorted. It is effective in circuits without stable ground lines. It can be used in high current circuits due to its low DC resistance. It has impedance of 30 ohm.
Nickel barrier structure of the external electrodes provides excellent solder heat resistance
Operating temperature range from -55 °C to 125 °C
Does not need a connection to ground
