Murata Ferrite Bead 0.5 mm (Surface) (0402) (Chip Ferrite Bead), 394 Ω impedance at 25 MHz, 600 Ω impedance at 100 MHz,
- N° de stock RS:
- 223-4868
- Référence fabricant:
- BLM15HG601BH1D
- Fabricant:
- Murata
Sous-total (1 bobine de 10000 unités)*
580,00 €
(TVA exclue)
700,00 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 40 000 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | la bobine* |
|---|---|---|
| 10000 + | 0,058 € | 580,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 223-4868
- Référence fabricant:
- BLM15HG601BH1D
- Fabricant:
- Murata
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Murata | |
| Package Type | 0402 | |
| Product Type | Ferrite Bead | |
| Impedance at 25 MHz | 394Ω | |
| Impedance at 50 MHz | 475Ω | |
| Packaging | Taping | |
| Impedance at 100 MHz | 600Ω | |
| Impedance at 300 MHz | 767Ω | |
| Impedance at 1 GHz | 1000Ω | |
| Current Rating | 20mA | |
| Mount Type | Surface | |
| Sub Type | Chip Ferrite Bead | |
| Minimum Operating Temperature | -55°C | |
| Maximum Operating Temperature | 150°C | |
| Standards/Approvals | AEC-Q200 | |
| Length | 1mm | |
| Height | 0.5mm | |
| Depth | 0.5mm | |
| Maximum DC Resistance | 0.7Ω | |
| Material | Ferrite | |
| Application | Automotive Electronics | |
| Automotive Standard | AEC-Q200 | |
| Series | BLM15H_BH | |
| Sélectionner tout | ||
|---|---|---|
Marque Murata | ||
Package Type 0402 | ||
Product Type Ferrite Bead | ||
Impedance at 25 MHz 394Ω | ||
Impedance at 50 MHz 475Ω | ||
Packaging Taping | ||
Impedance at 100 MHz 600Ω | ||
Impedance at 300 MHz 767Ω | ||
Impedance at 1 GHz 1000Ω | ||
Current Rating 20mA | ||
Mount Type Surface | ||
Sub Type Chip Ferrite Bead | ||
Minimum Operating Temperature -55°C | ||
Maximum Operating Temperature 150°C | ||
Standards/Approvals AEC-Q200 | ||
Length 1mm | ||
Height 0.5mm | ||
Depth 0.5mm | ||
Maximum DC Resistance 0.7Ω | ||
Material Ferrite | ||
Application Automotive Electronics | ||
Automotive Standard AEC-Q200 | ||
Series BLM15H_BH | ||
- Pays d'origine :
- JP
The Murata BLM15HG series chip ferrite bead has excellent frequency impedance characteristics. It is suitable for noise suppression in 1GHz or higher frequency. It can be used in high current circuits due to its low DC resistance. It has impedance of 600 ohm.
No Lead production using Ni+Sn plating in termination
Operating temperature range from -55 °C to 125 °C
Liens connexes
- Murata Ferrite Bead 0.5 mm (Surface) (0402) (Chip Ferrite Bead) 600 Ω impedance at 100 MHz,
- KEMET Ferrite Bead (Tape & Reel) (Chip Bead) 120 Ω impedance at 100 MHz, 321 Ω impedance at
- KEMET Ferrite Bead (Tape & Reel) (Chip Bead) 80 Ω impedance at 100 MHz, 85.8 Ω impedance at
- Murata Ferrite Bead 0.6 mm (0603) (Chip Ferrite Bead) 8.5 Ω impedance at 100 MHz, 19.8 Ω
- Murata Ferrite Bead 0.85 mm (Surface) (0805) (Chip Ferrite Bead) 600 Ω impedance at 100 MHz,
- Murata Ferrite Bead 0.5 mm (Surface) (0402) (Chip Ferrite Bead) 1.5 Ω impedance at 100 MHz,
- Murata Ferrite Bead 0.3 mm (Surface) (0201) (Chip Ferrite Bead) 600 Ω impedance at 100 MHz,
- Murata Ferrite Bead 0.8 mm (Surface) (0603) (Chip Ferrite Bead) 100 Ω impedance at 100 MHz,