ebm-papst Fan Speed Controller for Use with ebm-papst EC Fans, 10 V dc, 5 Speeds
- N° de stock RS:
- 743-4810
- Référence fabricant:
- CN1064
- Fabricant:
- ebm-papst
Sous-total (1 unité)*
33,92 €
(TVA exclue)
41,04 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 45 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 33,92 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 743-4810
- Référence fabricant:
- CN1064
- Fabricant:
- ebm-papst
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | ebm-papst | |
| For Use With | ebm-papst EC Fans | |
| Speed Settings | 5 Speeds | |
| Supply Voltage | 10 V dc | |
| Sélectionner tout | ||
|---|---|---|
Marque ebm-papst | ||
For Use With ebm-papst EC Fans | ||
Speed Settings 5 Speeds | ||
Supply Voltage 10 V dc | ||
- Pays d'origine :
- GB
EC PCB Fan Speed Controllers
Unboxed manual speed controllers for use with EBM-Papst EC (electronically commutated) fans. These are all purely the control assembly and PCB and are not mounted in an enclosure.
CN1003 (743-4807) variable speed controller
The CN1003 (743-4807) unboxed controller is designed for use with the full range of ebm-papst ECi (Electronically Commutated with integrated electronics) fans. It is powered via the DC output from by the fan and provides a 0-10V signal to enable infinitely variable speed control. The controller also enables speed measurement of the fan using a multimeter with a frequency measuring facility (where a tacho output is provided from the fan). Specification: Input voltage 10 VDC (supplied from fan); Maximum ambient temperature 50°C; Mounting hole diameter 10mm; Output voltage range 0-10 VDC.
CN1064 (743-4810) 5 position speed controller
The CN1064 (743-4810) unboxed 5 speed controller is designed for use with the full range of ebm-papst EC fans. Powered by the 10VDC output from the motor, it provides variable speed control with 5 speed settings. Each setting can be adjusted during commissioning between 0 % to 100% speed. This controller can control multiple fans running at the same speed. No separate power supply required.
CN1063 (743-4817) adjustable max / min variable speed controller
The CN1063 (743-4817) unboxed controller is designed for use with the full range of ebm-papst EC fans. Powered by the 10V DC output from the motor, it provides infinitely variable, manual speed control between 0% and 100%. However, the CN1063 (743-4817) differs from the CN1003 (743-4807) in that it has adjustable limits. The maximum and minimum speeds can be varied during commissioning to limit the maximum speed and/or restrict the lower speed. No separate power supply is required.