Vero Technologies 10-1042 2 DIN 41612, DIN 41617 Eurocard PCB FR2 With 53 x 5 1.02 mm Holes, 2.54 mm Pitch, 160 mm
- N° de stock RS:
- 434-267
- Référence fabricant:
- 10-1042
- Fabricant:
- Vero Technologies
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 unité)*
36,88 €
(TVA exclue)
44,62 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 51 unité(s) expédiée(s) à partir du 18 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 36,88 € |
| 5 - 9 | 35,05 € |
| 10 - 39 | 33,20 € |
| 40 + | 31,36 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 434-267
- Référence fabricant:
- 10-1042
- Fabricant:
- Vero Technologies
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Vero Technologies | |
| Board Material | Epoxy Glass | |
| Product Type | Eurocard PCB | |
| Number of Sides | 2 | |
| Copper Thickness | 1.6mm | |
| Hole Diameter | 1.02mm | |
| Hole Layout | 53 x 5 | |
| Hole Pitch | 2.54mm | |
| Connection | DIN 41612, DIN 41617 | |
| FR Material Grade | FR2 | |
| Board Thickness | 1.6mm | |
| Width | 100mm | |
| Length | 160mm | |
| Standards/Approvals | DIN 41617, DIN 41612 | |
| Sélectionner tout | ||
|---|---|---|
Marque Vero Technologies | ||
Board Material Epoxy Glass | ||
Product Type Eurocard PCB | ||
Number of Sides 2 | ||
Copper Thickness 1.6mm | ||
Hole Diameter 1.02mm | ||
Hole Layout 53 x 5 | ||
Hole Pitch 2.54mm | ||
Connection DIN 41612, DIN 41617 | ||
FR Material Grade FR2 | ||
Board Thickness 1.6mm | ||
Width 100mm | ||
Length 160mm | ||
Standards/Approvals DIN 41617, DIN 41612 | ||
- Pays d'origine :
- GB
Development Boards
DIN Type Stripboards
Suitable for use with the KM6-II eurocard sub-rack systems
The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way DIN 41612 indirect edge connectors may be fitted at either end.
The 3U (100x160) and 6U (233.4x160) boards are available with plated through holes (pth) as an alternative to the standard types. These boards have the added advantage of linking the top with the bottom pads directly via the holes, thereby dispensing with the need to fit linking pins, etc. Also the integrity of the joint is improved as the solder forms round the component lead on both surfaces, in addition to flowing through the hole. This helps to produce a solid and reliable connection, which is very important in applications where a high degree of vibration may be encountered.
Eurocards are manufactured from either epoxy glass material (blue) to BS4584 Part 3 or 16, or SRBP (synthetic resin bonded paper) material to BS4584 Part 5. Card thickness is 1.6mm. Copper 305g/m2 (1oz/ft2). Holes 1.0mm (0.040in.) dia. are pre-drilled on a 2.54mm matrix and all cards can be used with indirect edge connectors to DIN41612 (see Connectors/Terminals) except SRBP stripboard.
Note
Single-sided microboards have the same wiring pattern as the double-sided types, but omit the ground plane and 0 Volt rails on the component side of the card.
Liens connexes
- Vero Technologies 10-0581 1 DIN 41612 2.54 mm Pitch, 160 mm
- Vero Technologies 09-2196 1 DIN 41612 Eurocard PCB FR2 With 36 x 60 1.02 mm Holes, 160 mm
- Vero Technologies 10-27563 1 DIN 41612 Eurocard PCB FR4 With 2.54 x 2.54 1.02 mm Holes 160 mm
- DIN 41617 Connectors
- Vero Technologies 1.02 mm White Terminal Post
- Vero Technologies 1.02 mm Red Terminal Post
- Vero Technologies 1.02 mm Black Terminal Post
- RS PRO 1 Matrix Board FR2 1.02 mm Holes, 220 mm 100mm
