Microchip LAN9311I-NZW, Switch IC, 1.8 V 100 Mbps, 128-Pin 3.3V XVTQFP
- N° de stock RS:
- 825-1158
- Référence fabricant:
- LAN9311I-NZW
- Fabricant:
- Microchip
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 unité)*
15,30 €
(TVA exclue)
18,51 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 15 juillet 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 24 | 15,30 € |
| 25 - 99 | 14,53 € |
| 100 + | 13,84 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 825-1158
- Référence fabricant:
- LAN9311I-NZW
- Fabricant:
- Microchip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Microchip | |
| Product Type | Switch IC | |
| Maximum Data Rate | 100Mbps | |
| Sub Type | Switch | |
| Communication Mode | Full Duplex/Half Duplex | |
| Loopback Mode | Internal | |
| Standard Supported | IEEE 802.1Q | |
| Mount Type | Surface | |
| Package Type | XVTQFP | |
| Pin Count | 128 | |
| Maximum Supply Voltage | 3.3V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Length | 14.2mm | |
| Standards/Approvals | No | |
| Height | 1.2mm | |
| Minimum Supply Voltage | 1.8V | |
| Supply Current | 185mA | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Microchip | ||
Product Type Switch IC | ||
Maximum Data Rate 100Mbps | ||
Sub Type Switch | ||
Communication Mode Full Duplex/Half Duplex | ||
Loopback Mode Internal | ||
Standard Supported IEEE 802.1Q | ||
Mount Type Surface | ||
Package Type XVTQFP | ||
Pin Count 128 | ||
Maximum Supply Voltage 3.3V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Length 14.2mm | ||
Standards/Approvals No | ||
Height 1.2mm | ||
Minimum Supply Voltage 1.8V | ||
Supply Current 185mA | ||
Automotive Standard No | ||
LAN9311 10/100 Ethernet Switches
Microchip’s LAN9311 is a 2 Port Ethernet Switch IC that combines all the functions of a 10/100 switch system into one device. Integrated on-board is a high performance Switch Fabric, Packet Buffers, Buffer Manager, MACs, PHY Transceivers and a Host Bus Interface.
The LAN9311 complies with IEEE 802.3 10BASE-T/100 BASE-T Ethernet and 802.1D/Q Network Management protocols.
Features
2 Port Ethernet Switch with VLAN, QoS Packet Prioritization, Rate Limiting, IGMP Monitoring and Management functions
Interfaces with most 16-bit Embedded CPUs
Virtual PHY; simplifies Software Development
Integrated IEEE 1588 Hardware Time Stamp Unit
High Performance Ethernet Switch Fabric
2 internal 10/100 PHYs with HP Auto-MDIX support
Fully compliant with IEEE 802.3 standards
16-bit Host Bus Interface
Power Management Features
Ethernet Communications - Microchip
Liens connexes
- Microchip 1.8 V 100 Mbps, 128-Pin 3.3V PQFP
- Microchip KSZ8993M 1.8 V 100 Mbps, 128-Pin 3.3V PQFP
- Microchip KSZ8895RQXIA 1.8 V 100 Mbps, 128-Pin 3.3V PQFP
- Microchip KSZ8895MQXIA 1.8 V 100 Mbps RMII 128-Pin 3.3V PQFP
- Microchip 1.8 V 100 Mbps MII SNI 128-Pin 3.3V PQFP
- Microchip 1.8 V 100 Mbps MDC MDIO 128-Pin 3.3V PQFP
- Microchip KSZ8995XA 1.8 V 100 Mbps MDC MDIO 128-Pin 3.3V PQFP
- Microchip KSZ8995MAI 1.8 V 100 Mbps MII SNI 128-Pin 3.3V PQFP