Microchip, 28-Pin, Stand-Alone Ethernet Controller, 3.1 V SPI 3.6V ENC28J60-I/SP, SPI
- N° de stock RS:
- 698-8981P
- Référence fabricant:
- ENC28J60-I/SP
- Fabricant:
- Microchip
Indisponible
RS n'aura plus ce produit en stock.
- N° de stock RS:
- 698-8981P
- Référence fabricant:
- ENC28J60-I/SP
- Fabricant:
- Microchip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Microchip | |
| Product Type | Stand-Alone Ethernet Controller | |
| Sub Type | Controller | |
| Communication Mode | SPI | |
| Standard Supported | IEEE 802.3 | |
| Number of Ports | 1 | |
| Interface Type | SPI | |
| Mount Type | Through Hole | |
| Pin Count | 28 | |
| Maximum Supply Voltage | 3.6V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Length | 35.5mm | |
| Width | 7.4mm | |
| Height | 5.02mm | |
| Minimum Supply Voltage | 3.1V | |
| Standards/Approvals | RoHS | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Microchip | ||
Product Type Stand-Alone Ethernet Controller | ||
Sub Type Controller | ||
Communication Mode SPI | ||
Standard Supported IEEE 802.3 | ||
Number of Ports 1 | ||
Interface Type SPI | ||
Mount Type Through Hole | ||
Pin Count 28 | ||
Maximum Supply Voltage 3.6V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Length 35.5mm | ||
Width 7.4mm | ||
Height 5.02mm | ||
Minimum Supply Voltage 3.1V | ||
Standards/Approvals RoHS | ||
Automotive Standard No | ||
ECN28J60 10Base-T Ethernet Controllers
The ENC28J60 from Microchip is a great stand-alone ethernet controller. ENC28J60 is a 10BASE-T controller in a small form factor SOIC package with 28 pins. Featuring bandwidth of 10Mbps and onboard MAC & PHY, this controller is great for a range of applications. Microchips ethernet controllers also contain internal DMA for Faster memory copying and a max speed of 25Mhz.
Features and Benefits:
Applications:
PHY and MAC?
PHY stand for 'Physical layer'. A physical layer is the first layer in an OSI stack. PHY layer will define physical and electrical characteristics of the network.
MAC is the abbreviation for 'Medium Access Control' and is the second layer in the OSI stack. The MAC is responsible for sending and receiving RF frames.