Microchip, 28-Pin QFN EP, Controller IC, 3.3 V 10 Mbps Serial-SPI 3.6V ENC28J60-I/ML, Full Duplex/Half Duplex
- N° de stock RS:
- 666-5710P
- Référence fabricant:
- ENC28J60-I/ML
- Fabricant:
- Microchip
Offre groupée disponible
Consulter les options de prix de grosSous-total (25 unités, conditionné en tube)*
96,00 €
(TVA exclue)
116,25 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 50 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 25 - 99 | 3,84 € |
| 100 + | 3,70 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 666-5710P
- Référence fabricant:
- ENC28J60-I/ML
- Fabricant:
- Microchip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Microchip | |
| Maximum Data Rate | 10Mbps | |
| Product Type | Controller IC | |
| Sub Type | Ethernet Controller | |
| Communication Mode | Full Duplex/Half Duplex | |
| Interface Type | Serial-SPI | |
| Number of Ports | 1 | |
| Standard Supported | IEEE 802.3 | |
| Mount Type | Surface | |
| Package Type | QFN EP | |
| Maximum Supply Voltage | 3.6V | |
| Pin Count | 28 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Length | 6mm | |
| Height | 1mm | |
| Minimum Supply Voltage | 3.3V | |
| Standards/Approvals | ISO 9001:2000, ISO/TS-16949:2002 | |
| Width | 6mm | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Microchip | ||
Maximum Data Rate 10Mbps | ||
Product Type Controller IC | ||
Sub Type Ethernet Controller | ||
Communication Mode Full Duplex/Half Duplex | ||
Interface Type Serial-SPI | ||
Number of Ports 1 | ||
Standard Supported IEEE 802.3 | ||
Mount Type Surface | ||
Package Type QFN EP | ||
Maximum Supply Voltage 3.6V | ||
Pin Count 28 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Length 6mm | ||
Height 1mm | ||
Minimum Supply Voltage 3.3V | ||
Standards/Approvals ISO 9001:2000, ISO/TS-16949:2002 | ||
Width 6mm | ||
Automotive Standard No | ||
ECN28J60 10Base-T Ethernet Controllers
The ENC28J60 from Microchip is a great stand-alone ethernet controller. ENC28J60 is a 10BASE-T controller in a small form factor SOIC package with 28 pins. Featuring bandwidth of 10Mbps and onboard MAC & PHY, this controller is great for a range of applications. Microchips ethernet controllers also contain internal DMA for faster memory copying and a max speed of 25Mhz.
Features and Benefits:
Applications:
PHY and MAC?
PHY stand for 'Physical layer'. A physical layer is the first layer in an OSI stack. PHY layer will define physical and electrical characteristics of the network.
MAC is the abbreviation for 'Medium Access Control' and is the second layer in the OSI stack. The MAC is responsible for sending and receiving RF frames.