Microchip, Ethernet Switch IC, 3.13 V 100 Mbps RGMII, RMII, MII, 128-Pin 3.46 V TQFP
- N° de stock RS:
- 239-5584P
- Référence fabricant:
- KSZ9896CTXI
- Fabricant:
- Microchip
Offre groupée disponible
Sous-total 10 unités (conditionné en plateau)*
136,70 €
(TVA exclue)
165,40 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 41 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 10 - 24 | 13,67 € |
| 25 - 49 | 12,68 € |
| 50 - 89 | 12,41 € |
| 90 + | 12,17 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 239-5584P
- Référence fabricant:
- KSZ9896CTXI
- Fabricant:
- Microchip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Microchip | |
| Maximum Data Rate | 100Mbps | |
| Product Type | Ethernet Switch IC | |
| Communication Mode | Full Duplex/Half Duplex | |
| Number of Transceivers | 5 | |
| Interface Type | RGMII, RMII, MII | |
| Package Type | TQFP | |
| Pin Count | 128 | |
| Maximum Supply Voltage | 3.46V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Minimum Supply Voltage | 3.13V | |
| Standards/Approvals | RoHS | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Microchip | ||
Maximum Data Rate 100Mbps | ||
Product Type Ethernet Switch IC | ||
Communication Mode Full Duplex/Half Duplex | ||
Number of Transceivers 5 | ||
Interface Type RGMII, RMII, MII | ||
Package Type TQFP | ||
Pin Count 128 | ||
Maximum Supply Voltage 3.46V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Minimum Supply Voltage 3.13V | ||
Standards/Approvals RoHS | ||
Automotive Standard No | ||
The Microchip KSZ9896C series of highly-integrated, IEEE 802.3 compliant networking device incorporate a layer-2 managed Gigabit Ethernet switch, five 10BASE-Te/100BASE-TX/1000BASE-T physical layer transceivers (PHYs) and associated MAC units, and one configurable GMII/RGMII/MII/RMII MAC port for direct connection to a host processor/controller, another Ethernet switch, or an Ethernet PHY transceiver. The flexible digital I/O voltage on the KSZ9896CTXI allows the MAC port to interface directly with a 1.8/2.5/3.3V host processor/controller/FPGA. Additionally, a robust assortment of power-management features including Wake-on-LAN (WoL) for low power standby operation, have been designed to satisfy energy-efficient system requirements.
Requires 2 to 3 power supply for 1.8 V, 2.5 V, or 3.3 V
Non-blocking wire-speed Ethernet switch fabric supports 1 Gbps on RGMII
Full-featured forwarding and filtering control, including port-based Access Control List (ACL) filtering
Full VLAN and QoS support
Traffic prioritization with per-port ingress/egress queues and by traffic classification