Microchip KSZ8091RNAIA-TR, Ethernet Transceiver, 3.3 V 100 Mbps, 24-Pin 3.3 V QFN
- N° de stock RS:
- 235-4639
- Référence fabricant:
- KSZ8091RNAIA-TR
- Fabricant:
- Microchip
Sous-total (1 bobine de 1000 unités)*
1 545,00 €
(TVA exclue)
1 869,00 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
Temporairement en rupture de stock
- Expédition à partir du 08 avril 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | la bobine* |
|---|---|---|
| 1000 + | 1,545 € | 1 545,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 235-4639
- Référence fabricant:
- KSZ8091RNAIA-TR
- Fabricant:
- Microchip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Microchip | |
| Maximum Data Rate | 100Mbps | |
| Product Type | Ethernet Transceiver | |
| Sub Type | Transceiver | |
| Standard Supported | IEEE 802.3 | |
| Package Type | QFN | |
| Maximum Supply Voltage | 3.3V | |
| Pin Count | 24 | |
| Standards/Approvals | No | |
| Height | 1mm | |
| Width | 4 mm | |
| Minimum Supply Voltage | 3.3V | |
| Length | 4mm | |
| Automotive Standard | No | |
| Supply Current | 47mA | |
| Sélectionner tout | ||
|---|---|---|
Marque Microchip | ||
Maximum Data Rate 100Mbps | ||
Product Type Ethernet Transceiver | ||
Sub Type Transceiver | ||
Standard Supported IEEE 802.3 | ||
Package Type QFN | ||
Maximum Supply Voltage 3.3V | ||
Pin Count 24 | ||
Standards/Approvals No | ||
Height 1mm | ||
Width 4 mm | ||
Minimum Supply Voltage 3.3V | ||
Length 4mm | ||
Automotive Standard No | ||
Supply Current 47mA | ||
The Microchip KSZ8091 series is a single-supply 10Base-T/100Base-TX Ethernet physical-layer transceiver for transmission and reception of data over standard CAT-5 unshielded twisted pair cable. The KSZ8091 is a highly-integrated PHY solution. It reduces board cost and simplifies board layout by using on-chip termination resistors for the differential pairs, integrating a low-noise regulator to supply the 1.2V core and by offering a flexible 1.8/2.5/3.3V digital I/O interface.
Single-chip 10Base-T/100Base-TX IEEE 802.3 compliant Ethernet transceiver
Wake-on-LAN support with either magic packet, link status change, or robust custom-packet detection
Power-down and power-saving modes
Built-in 1.2V regulator for core
On-chip termination resistors for the differential pairs
Liens connexes
- Microchip KSZ8091RNAIA-TR 3.3 V 100 Mbps, 24-Pin 3.3 V QFN
- Microchip KSZ8081RNBIA-TR 3.3 V 100 Mbps, 32-Pin 3.3 V QFN
- Microchip KSZ8081RNAIA-TR 3.3 V 100 Mbps RMII, 24-Pin 3.3 V QFN
- Microchip KSZ8081RNACA-TR 3.3 V 100 Mbps RMII, 24-Pin 3.3 V QFN
- Microchip KSZ8041NL-TR 3.3 V 100 Mbps MII 32-Pin 3.3 V QFN
- Microchip KSZ8041NLI-TR 3.3 V 100 Mbps RMII 32-Pin 3.3 V QFN
- Microchip KSZ8081MNXCA-TR 3.3 V 100 Mbps MII 32-Pin 3.3 V QFN
- Microchip KSZ8081RNBCA-TR 3.3 V 100 Mbps MII 32-Pin 3.3 V QFN
