Microchip, Ethernet Controller, 3.3 V 100 Mbps Host Bus, 64-Pin 3.3V QFN
- N° de stock RS:
- 178-5356
- Référence fabricant:
- LAN9252I/ML
- Fabricant:
- Microchip
Sous-total (1 plateau de 260 unités)*
2 012,40 €
(TVA exclue)
2 436,20 €
(TVA incluse)
Informations sur le stock actuellement non accessibles - Veuillez vérifier plus tard
Unité | Prix par unité | le plateau* |
|---|---|---|
| 260 + | 7,74 € | 2 012,40 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 178-5356
- Référence fabricant:
- LAN9252I/ML
- Fabricant:
- Microchip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Microchip | |
| Maximum Data Rate | 100Mbps | |
| Product Type | Ethernet Controller | |
| Communication Mode | Full Duplex/Half Duplex | |
| Loopback Mode | Internal | |
| Standard Supported | ANSI X3.263, IEEE 802.3u, IEEE 802.3 | |
| Interface Type | Host Bus | |
| Mount Type | Surface | |
| Package Type | QFN | |
| Maximum Supply Voltage | 3.3V | |
| Pin Count | 64 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Minimum Supply Voltage | 3.3V | |
| Length | 9mm | |
| Height | 1mm | |
| Standards/Approvals | No | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Microchip | ||
Maximum Data Rate 100Mbps | ||
Product Type Ethernet Controller | ||
Communication Mode Full Duplex/Half Duplex | ||
Loopback Mode Internal | ||
Standard Supported ANSI X3.263, IEEE 802.3u, IEEE 802.3 | ||
Interface Type Host Bus | ||
Mount Type Surface | ||
Package Type QFN | ||
Maximum Supply Voltage 3.3V | ||
Pin Count 64 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Minimum Supply Voltage 3.3V | ||
Length 9mm | ||
Height 1mm | ||
Standards/Approvals No | ||
Automotive Standard No | ||
LAN9252 EtherCAT® Slave Controllers
The LAN9252 device from Microchip is a 2/3 port EtherCAT® slave controller with dual integrated Ethernet PHYs, each of which contain a full-duplex 100BASE-TX transceiver. The LAN9252 supports HP Auto MDI-X that allows the use of direct connect or cross-over LAN cables. 100BASE-FX is supported via an external fiber transceiver. Included is a 3 port EtherCAT® slave controller with 4K bytes of Dual Port memory (DPRAM), 4 SyncManagers, 3 Fieldbus Memory Management Units (FMMUs) and a 64-bit Distributed Clock. The LAN9252 supports 4 Process Data Interfaces - SPI/SQI, HBI and a 16 Bit Digital IO.
Features
2/3-port EtherCAT® Slave Controller with 3 Fieldbus Memory Management Units (FMMUs) and 4 SyncManagers
Interfaces with most 8/16-bit Embedded Controllers; can also interface with 32-bit Embedded Controllers with an 8/16-bit bus
Dual integrated Ethernet PHYs with HP Auto-MDIX
Cable diagnostic support
100BASE-FX support via an External Transceiver
1.8V to 3.3V variable voltage I/O
Integrated 1.2V Regulator for single 3.3V operation
Ethernet Communications - Microchip
Liens connexes
- Microchip LAN9252I/ML 3.3 V 100 Mbps Host Bus, 64-Pin 3.3V QFN
- Microchip 3.3 V 100 Mbps Host Bus, 64-Pin 3.3V TQFP
- Microchip LAN9252I/PT 3.3 V 100 Mbps Host Bus, 64-Pin 3.3V TQFP
- Microchip LAN9220-ABZJ 1.62 V 100 Mbps SMI 56-Pin 3.3V QFN
- Microchip LAN9218I-MT 3.3 V 100 Mbps Host Bus 100-Pin 3.3V TQFP
- Microchip LAN9218-MT 3.3 V 100 Mbps Host Bus 100-Pin 3.3V TQFP
- Microchip KSZ8864CNXIA 3.3 V 100 Mbps, 64-Pin 3.3V QFN
- Microchip LAN9514I-JZX 3.3 V 480 Mbps, 64-Pin 3.3V QFN