Microchip, Ethernet Switch IC, 3.3 V 100 Mbps SPI, GMII, MII, MIIM, RMII, RGMII, 80-Pin 3.3V LQFP
- N° de stock RS:
- 177-3988P
- Référence fabricant:
- KSZ8795CLXCC
- Fabricant:
- Microchip
Actuellement indisponible
Désolés, nous ne savons pas quand ce produit sera réapprovisionné.
- N° de stock RS:
- 177-3988P
- Référence fabricant:
- KSZ8795CLXCC
- Fabricant:
- Microchip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Microchip | |
| Product Type | Ethernet Switch IC | |
| Maximum Data Rate | 100Mbps | |
| Sub Type | Switch | |
| Communication Mode | SPI, MIIM (MDC/MDIO) | |
| Number of Transceivers | 4 | |
| Loopback Mode | PHY, Mac Modes, Multiple Loopback of Remote | |
| Interface Type | SPI, GMII, MII, MIIM, RMII, RGMII | |
| Standard Supported | IEEE 802.1az, IEEE 802.3az, IEEE 802.1Q, IEEE, IEEE 802.3u, IEEE 802.3 | |
| Mount Type | Surface | |
| Package Type | LQFP | |
| Maximum Supply Voltage | 3.3V | |
| Pin Count | 80 | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 70°C | |
| Height | 1.6mm | |
| Standards/Approvals | RoHS-compliant | |
| Minimum Supply Voltage | 3.3V | |
| Length | 10.1mm | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Microchip | ||
Product Type Ethernet Switch IC | ||
Maximum Data Rate 100Mbps | ||
Sub Type Switch | ||
Communication Mode SPI, MIIM (MDC/MDIO) | ||
Number of Transceivers 4 | ||
Loopback Mode PHY, Mac Modes, Multiple Loopback of Remote | ||
Interface Type SPI, GMII, MII, MIIM, RMII, RGMII | ||
Standard Supported IEEE 802.1az, IEEE 802.3az, IEEE 802.1Q, IEEE, IEEE 802.3u, IEEE 802.3 | ||
Mount Type Surface | ||
Package Type LQFP | ||
Maximum Supply Voltage 3.3V | ||
Pin Count 80 | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 70°C | ||
Height 1.6mm | ||
Standards/Approvals RoHS-compliant | ||
Minimum Supply Voltage 3.3V | ||
Length 10.1mm | ||
Automotive Standard No | ||
- Pays d'origine :
- TW
The KSZ8795 is a highly-integrated, Layer 2-managed, 5-port switch with numerous features designed to reduce system cost. It is intended for cost-sensitive applications requiring four 10/100Mbps copper ports and one 10/100/1000Mbps Gigabit uplink port
Integrated 5-port 10/100 Layer-2 switch with Gigabit uplink
New generation switch with four MACs, one GMAC (for uplink) and four PHYs
10/100Base-T/TX switch system which combines a switch engine, frame buffer management, address lookup table, queue management, MIB counters, MAC, and PHY transceivers
Rapid spanning tree support (RSTP) for topology management
Microchip's LinkMD® cable diagnostic capabilities for determining cable opens, shorts, and length
Advanced Switch Capabilities
VLAN support for up to 128 active VLAN groups (full range 4096 of VLAN IDs)
Support 802.1x port-based security and MAC-based authentication via access control lists (ACL)
QoS/CoS Packet Prioritization Support