Microchip, Ethernet Switch IC, 3.3 V 100 Mbps RMII, MDIO, MII, MDC, RGMII, SPI, 64-Pin 3.3V QFN
- N° de stock RS:
- 177-3946P
- Référence fabricant:
- KSZ8794CNXCC
- Fabricant:
- Microchip
Sous-total 2 unités (conditionné en plateau)*
9,42 €
(TVA exclue)
11,40 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 1 038 unité(s) expédiée(s) à partir du 08 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 2 + | 4,71 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 177-3946P
- Référence fabricant:
- KSZ8794CNXCC
- Fabricant:
- Microchip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Microchip | |
| Product Type | Ethernet Switch IC | |
| Maximum Data Rate | 100Mbps | |
| Sub Type | Layer 2 Managed Ethernet Switch | |
| Communication Mode | MDIO, SPI, MDC | |
| Number of Transceivers | 4 | |
| Loopback Mode | Multiple Loopback of Remote Phy and Mac Modes | |
| Standard Supported | IEEE 802.3az, IEEE 802.3, IEEE 802.1az, IEEE, IEEE 802.3u, IEEE 802.1Q | |
| Interface Type | RMII, MDIO, MII, MDC, RGMII, SPI | |
| Mount Type | Surface | |
| Package Type | QFN | |
| Pin Count | 64 | |
| Maximum Supply Voltage | 3.3V | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 70°C | |
| Height | 0.8mm | |
| Standards/Approvals | RoHS, Lead-Free | |
| Length | 8mm | |
| Minimum Supply Voltage | 3.3V | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Microchip | ||
Product Type Ethernet Switch IC | ||
Maximum Data Rate 100Mbps | ||
Sub Type Layer 2 Managed Ethernet Switch | ||
Communication Mode MDIO, SPI, MDC | ||
Number of Transceivers 4 | ||
Loopback Mode Multiple Loopback of Remote Phy and Mac Modes | ||
Standard Supported IEEE 802.3az, IEEE 802.3, IEEE 802.1az, IEEE, IEEE 802.3u, IEEE 802.1Q | ||
Interface Type RMII, MDIO, MII, MDC, RGMII, SPI | ||
Mount Type Surface | ||
Package Type QFN | ||
Pin Count 64 | ||
Maximum Supply Voltage 3.3V | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 70°C | ||
Height 0.8mm | ||
Standards/Approvals RoHS, Lead-Free | ||
Length 8mm | ||
Minimum Supply Voltage 3.3V | ||
Automotive Standard No | ||
The KSZ8794CNX is a highly integrated, Layer 2 managed, four-port switch with numerous features designed to reduce system cost. It is intended for cost-sensitive applications requiring three 10/100Mbps copper ports and one 10/100/1000Mbps Gigabit uplink port. The KSZ8794CNX incorporates a small package outline, low power consumption with internal biasing, and on-chip termination
Integrated 4-port 10/100 Layer-2 switch with Gigabit uplink
New generation switch with three MACs, one GMAC (for uplink) and three PHYs
10/100Base-T/TX switch system which combines a switch engine, frame buffer management, address lookup table, queue management, MIB counters, MAC, and PHY transceivers
Rapid spanning tree support (RSTP) for topology management
Microchip's LinkMD® cable diagnostic capabilities for determining cable opens, shorts, and length
Advanced Switch Capabilities
VLAN support for up to 128 active VLAN groups (full range 4096 of VLAN IDs)