Microchip KSZ8041TL, Physical Layer Transceiver, 3.3 V 100 Mbps RMII, MII, SMII, 48-Pin 3.3 V TQFP
- N° de stock RS:
- 177-3876P
- Référence fabricant:
- KSZ8041TL
- Fabricant:
- Microchip
Offre groupée disponible
Sous-total 25 unités (conditionné en plateau)*
73,30 €
(TVA exclue)
88,70 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 500 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 25 - 95 | 2,932 € |
| 100 + | 2,828 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 177-3876P
- Référence fabricant:
- KSZ8041TL
- Fabricant:
- Microchip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Microchip | |
| Maximum Data Rate | 100Mbps | |
| Product Type | Physical Layer Transceiver | |
| Sub Type | Transceiver | |
| Communication Mode | MII, RMII, SMI | |
| Interface Type | RMII, MII, SMII | |
| Standard Supported | IEEE 802.3u | |
| Mount Type | Surface Mount | |
| Package Type | TQFP | |
| Maximum Supply Voltage | 3.3V | |
| Pin Count | 48 | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 70°C | |
| Length | 7.1mm | |
| Height | 1.6mm | |
| Width | 7.1 mm | |
| Minimum Supply Voltage | 3.3V | |
| Standards/Approvals | RoHS | |
| Automotive Standard | No | |
| Supply Current | 58.3mA | |
| Sélectionner tout | ||
|---|---|---|
Marque Microchip | ||
Maximum Data Rate 100Mbps | ||
Product Type Physical Layer Transceiver | ||
Sub Type Transceiver | ||
Communication Mode MII, RMII, SMI | ||
Interface Type RMII, MII, SMII | ||
Standard Supported IEEE 802.3u | ||
Mount Type Surface Mount | ||
Package Type TQFP | ||
Maximum Supply Voltage 3.3V | ||
Pin Count 48 | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 70°C | ||
Length 7.1mm | ||
Height 1.6mm | ||
Width 7.1 mm | ||
Minimum Supply Voltage 3.3V | ||
Standards/Approvals RoHS | ||
Automotive Standard No | ||
Supply Current 58.3mA | ||
- Pays d'origine :
- US
The KSZ8041 is a single supply 10Base-T/100Base-TX Physical Layer Transceiver, which provides MII/RMII/SMII interfaces to transmit and receive data.
Single-chip 10Base-T/100Base-TX physical layer solution
Low power
Power consumption of <180mW
Power down and power saving modes
Built-in 1.8V regulator for core
Single power supply (3.3V)
HP auto MDI/MDI-X for reliable detection and correction for straight-through and crossover cables with disable and enable option
Robust operation over standard cables
MII Interface support (KSZ8041NL only)
RMII Interface Support
External 50MHz system clock (KSZ8041NL or KSZ8041TL/FTL)
25MHz crystal/clock input and 50MHz reference clock output to MAC (KSZ8041RNL)
SMII Interface Support
External 125MHz system clock and 12.5MHz sync clock from MAC (KSZ8041TL/FTL only)
Fiber support 100Base-FX (KSZ8041FTL only)
MIIM (MDC/MDIO) management bus to 6.25MHz for Rapid PHY register configuration
Interrupt pin option
Liens connexes
- Microchip KSZ8041TL 3.3 V 100 Mbps RMII SMII, 48-Pin 3.3 V TQFP
- Microchip KSZ8041FTLI 3.3 V 100 Mbps MII SMII, 48-Pin 3.3 V TQFP
- Microchip KSZ8041TLI 3.3 V 100 Mbps MII RMII, 48-Pin 3.3 V TQFP
- Microchip KSZ8721BL-TR 3.3 V 100 Mbps RMII 48-Pin 3.3 V LQFP
- Microchip KSZ8721BT 2.5 V 100 Mbps MII 48-Pin 3.3 V TQFP
- Microchip LAN8710AI-EZK 3.3 V 100 Mbps MII 32-Pin 3.3 V VQFN
- Microchip LAN8710A-EZC 3.3 V 100 Mbps RMII 32-Pin 3.3 V VQFN
- Microchip KSZ8041NL-TR 3.3 V 100 Mbps MII 32-Pin 3.3 V QFN