Microchip, Ethernet Transceiver, 3.3 V 100 Mbps RMII, 32-Pin 3.3 V QFN

Sous-total 4 unités (conditionné en plateau)*

7,532 €

(TVA exclue)

9,112 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
Commandes ci-dessous 75,00 € coût (TVA exclue) 5,95 €.
En stock
  • 908 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
4 +1,883 €

*Prix donné à titre indicatif

Options de conditionnement :
N° de stock RS:
122-4833P
Référence fabricant:
KSZ8061RNDW
Fabricant:
Microchip
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Microchip

Maximum Data Rate

100Mbps

Product Type

Ethernet Transceiver

Sub Type

Transceiver

Communication Mode

100Base-TX, 10Base-T

Number of Transceivers

1

Loopback Mode

Local (Digital) Loopback, Remote (Analogue) Loopback

Standard Supported

IEEE 802.3az

Interface Type

RMII

Mount Type

Surface

Package Type

QFN

Maximum Supply Voltage

3.3V

Pin Count

32

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

105°C

Height

0.8mm

Length

5mm

Standards/Approvals

IEEE 802.3az, AEC-Q100

Minimum Supply Voltage

3.3V

Width

5 mm

Automotive Standard

AEC-Q100

Supply Current

59mA

KSZ8061R 10/100 Ethernet Transceiver


The Microchip KSZ8061 is a 10Base-T/100Base-TX Ethernet Transceiver designed for applications using Unshielded Twisted Pair (UTP) cable. The features of the KSZ8061 make it ideal for automotive applications.

Featured is Quiet-WIRE®, technology that delivers programmable, integrated noise filtering to reduce emissions and enhance immunity. Quiet-WIRE® allows the KSZ8061 to operate in applications with stringent emission limits where previously more costly Shielded Cable was needed.

This KSZ8016R variant features a Reduced Media Independent Interface (RMII) interface to connect with Ethernet MAC Processors and Switches.

Features


Quiet-WIRE® Programmable EMI Filter

Exceeds AEC-Q100 and EMC requirements

MII interface with MDC/MDIO management interface for register configuration

On-chip Termination Resistors for differential pairs

LinkMD®+ Receive Signal Quality Indicator

Supports IEEE 802.3az Energy Efficient Ethernet

Ultra Deep Sleep standby mode

Loopback mode for diagnostics

Programmable interrupt output

Ethernet Communications - Microchip