WIZnet Inc W5100, Ethernet Controller, 3.3 V 100 Mbps SPI, 80-Pin 3.3 V LQFP

Voir la catégorie

Sous-total (1 unité)*

4,07 €

(TVA exclue)

4,92 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 178 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
  • Plus 4 801 unité(s) expédiée(s) à partir du 18 février 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +4,07 €

*Prix donné à titre indicatif

N° de stock RS:
419-930
Référence fabricant:
W5100
Fabricant:
WIZnet Inc
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

WIZnet Inc

Product Type

Ethernet Controller

Maximum Data Rate

100Mbps

Sub Type

Controller

Communication Mode

Full Duplex/Half Duplex

Loopback Mode

Internal

Interface Type

SPI

Standard Supported

IEEE 802.3u

Number of Ports

4

Mount Type

Surface

Package Type

LQFP

Maximum Supply Voltage

3.3V

Pin Count

80

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

85°C

Minimum Supply Voltage

3.3V

Standards/Approvals

RoHS

Automotive Standard

No

Pays d'origine :
KR

Embedded Ethernet Controllers


WIZnet's range of Embedded Ethernet controller Chips, which inlcudes the following:

RTL8201CP-VD-LF is a single chip/single port PHYceiver with an MII (Media Independent Interface)/SNI(Serial Network Interface) and implements all 10/100M Ethernet Physical-layer functions. A PECL Interface is supported to connect with an external 100Base-FX Fiber optic tranceiver

W3100A-LF is a fully hardwired TCP/IP stack supporting TCP, UDP, IP, ARP, ICMP, MAC internet protocols. Features include amazing protocol processing speed depending upon MCU); 8051 (max. 1Mbps), AVR (max.8 Mbps), ARM7 (max. 21Mbps)

W3150A+ is a fully hardwired TCP/IP stack with support for ADSL connection (with PPPoE) and TCP, UDP, IP, ARP, ICMP, IGMP, PPPoE, MAC protocols. Features include High Throughput speeds; 8051(max. 1Mbps), AVR (max. 8Mbps), ARM7 (max. 21Mbps) and 10/100 Base-T Ethernet (Auto detection) support

W5100 is a fully hardwired TCP/IP stack with support for TCP, UDP, ICMP, IPv4 ARP, IGMP, PPPoE protocols. Features include 10BaseT/100BaseTX Ethernet MAC/PHY embedded support and ADSL connection (with PPPoE Protocol with PAP/CHAP Authentication mode)

W5300 is designed for Internet embedded applications. The full hardware logic integrates 10/100 Ethernet controller, MAC, and TCP/IP with communication protocols such as TCP, UDP, IPv4, ICMP, IGMP, ARP and PPPoE. The data communication memory is extended to 128Kbyte and supports 16-bit bus interface.

Liens connexes