Microchip LAN8651B1-E/LMX, Ethernet Controller 10 Mbps SPI, 32-Pin 3.3 V VQFN-32
- N° de stock RS:
- 352-163
- Référence fabricant:
- LAN8651B1-E/LMX
- Fabricant:
- Microchip
Offre groupée disponible
Sous-total (1 unité)*
6,52 €
(TVA exclue)
7,89 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- Plus 350 unité(s) expédiée(s) à partir du 11 février 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 9 | 6,52 € |
| 10 + | 5,87 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 352-163
- Référence fabricant:
- LAN8651B1-E/LMX
- Fabricant:
- Microchip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Microchip | |
| Product Type | Ethernet Controller | |
| Maximum Data Rate | 10Mbps | |
| Communication Mode | Half Duplex | |
| Interface Type | SPI | |
| Standard Supported | IEEE | |
| Package Type | VQFN-32 | |
| Pin Count | 32 | |
| Maximum Supply Voltage | 3.3V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Standards/Approvals | IEEE Std 802.1AS, IEEE Std 1588 | |
| Sélectionner tout | ||
|---|---|---|
Marque Microchip | ||
Product Type Ethernet Controller | ||
Maximum Data Rate 10Mbps | ||
Communication Mode Half Duplex | ||
Interface Type SPI | ||
Standard Supported IEEE | ||
Package Type VQFN-32 | ||
Pin Count 32 | ||
Maximum Supply Voltage 3.3V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Standards/Approvals IEEE Std 802.1AS, IEEE Std 1588 | ||
- Pays d'origine :
- TH
The Microchip MAC-PHY Ethernet Controller with SPI combines a Media Access Controller (MAC) and an Ethernet PHY to enable low‑cost microcontrollers, including those without an onboard MAC, to access 10BASE‑T1S networks. The common standard Serial Peripheral Interface (SPI) of the LAN8650 allows interfacing with nearly any microcontroller, so that the transfer of Ethernet packets and LAN8650 control/status commands are performed over a single, serial interface. SPI also requires only 4 pins, enabling a simpler hardware interface with fewer pins than MII or RMII.
Internal wall clock
Event generation and event capture synchronized to the wall clock
Phase adjuster for the wall clock to minimize microcontroller overhead
Packet timestamping
Liens connexes
- Microchip LAN8650B1-E/LMX 10Mbps SPI 3.3 V, 32-Pin VQFN
- Microchip LAN8670C2-E/LMX 10Mbps MII 3.3 V, 32-Pin VQFN
- Microchip LAN8651B0-E/LMX 10Mbit/s SPI 2.5 V, 32-Pin 32-VQFN
- Microchip LAN8650B0-E/LMX 10Mbit/s SPI 2.5 V, 32-Pin 32-VQFN
- Microchip LAN8651B1T-E/LMX 100Mbps 1.2 V, 24-Pin VQFN
- Microchip LAN8650B1T-E/LMX 100Mbps 1.2 V, 24-Pin VQFN
- Microchip LAN8671C2-E/U3B 10Mbps RMII 24-Pin VQFN
- Microchip LAN8672C2-E/LNX 10Mbps MII 36-Pin VQFN
