Microchip LAN7800T/Y9X, Ethernet Transceiver, 1.8 V 1000 Mbps GMII, 48-Pin 3.3 V QFN
- N° de stock RS:
- 333-093
- Référence fabricant:
- LAN7800T/Y9X
- Fabricant:
- Microchip
Sous-total (1 bobine de 3000 unités)*
21 198,00 €
(TVA exclue)
25 650,00 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
Temporairement en rupture de stock
- Expédition à partir du 22 avril 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | la bobine* |
|---|---|---|
| 3000 + | 7,066 € | 21 198,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 333-093
- Référence fabricant:
- LAN7800T/Y9X
- Fabricant:
- Microchip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Microchip | |
| Maximum Data Rate | 1000Mbps | |
| Product Type | Ethernet Transceiver | |
| Communication Mode | Full Duplex/Half Duplex | |
| Standard Supported | IEEE | |
| Interface Type | GMII | |
| Package Type | QFN | |
| Pin Count | 48 | |
| Maximum Supply Voltage | 3.3V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Standards/Approvals | RoHS | |
| Minimum Supply Voltage | 1.8V | |
| Automotive Standard | No | |
| Supply Current | 60mA | |
| Sélectionner tout | ||
|---|---|---|
Marque Microchip | ||
Maximum Data Rate 1000Mbps | ||
Product Type Ethernet Transceiver | ||
Communication Mode Full Duplex/Half Duplex | ||
Standard Supported IEEE | ||
Interface Type GMII | ||
Package Type QFN | ||
Pin Count 48 | ||
Maximum Supply Voltage 3.3V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Standards/Approvals RoHS | ||
Minimum Supply Voltage 1.8V | ||
Automotive Standard No | ||
Supply Current 60mA | ||
The Microchip LAN7800 Super Speed USB3 Gen1 to 10/100/1000 Gigabit Ethernet bridge providing an ultra high performance and cost effective USB to Ethernet connectivity solution. The LAN7800 contains an integrated 10/100/1000 Gigabit Ethernet PHY, USB PHY, Hi Speed USB 2.0 device controller, SuperSpeed USB3.2 Gen1 device controller, 10/100/1000 Gigabit Ethernet MAC, Integrated OTP, EEPROM controller. Ethernet controller supports auto negotiation, auto polarity correction, HP Auto MDIX† support and is compliant with IEEE 802.3/802.3u/802.3ab standards.
Provides dedicated PME wake up signal
Always on always connected
Internal OTP memory to remove the need for external EEPROM
Integrated core voltage regulator
Requires only a single 25MHz crystal
Liens connexes
- Microchip LAN7800T-I/Y9X 1.8 V 1000 Mbps USB, 48-Pin 3.3 V SQFN
- Microchip LAN7430T-I/Y9X 0.5 V 1000 Mbps, 24-Pin 3.3 V QFN
- Microchip 3.3 V MII 64-Pin 3.3 V QFN
- Microchip KSZ9131MNXI 3.3 V MII 64-Pin 3.3 V QFN
- Microchip LAN7430T/Y9X 3.3 V 1000 Mbps, 48-Pin 3.3 V VQFN
- Microchip KSZ8081RNDCA-TR 1.8 V 100 Mbps RMII v1.2, 24-Pin 3.3 V QFN
- Microchip LAN7800T/VSX 1.8 V 1000 Mbps USB, 48-Pin 3.3 V SQFN
- Microchip LAN8742AI-CZ-TR 1.8 V 100 Mbps RMII, 24-Pin 3.3 V QFN