Phoenix Contact Cat5 Right Angle Male M12 to Straight Male RJ45 Ethernet Cable, Shielded, Blue Polyurethane Sheath, 2m,

Phoenix Contact brings you a range of brilliant industrial ethernet (network) cable assemblies. These assemblies are RJ45 connectors to an M12 for all your industrial needs. The NBC-MSD range of ethernet cables are Cat5 cables (100 Mbps) and come in a variety of orientations such as a straight RJ45, angled RJ45 and different cable lengths to match all of your needs. The opposite end of the RJ45 connector sits a M12. Phoenix's M12 connectors include their top of the line SPEEDCON technology to make it effortless, strong and reliable connection to another circular connector.

The NBC-MSD cables all feature an IP67 rating when mated (M connector only, not applicable to RJ45), 2-twisted cores to the pair and the colour of the sheath is a beautiful blue.

SPEEDCON is a technology installed on the M (circular connector) side of these ethernet cables. The SPEEDCON allows you to install your M12 connection in half a turn. Not only does the cable install rapidly, it provides an extra secure fitment to your mating connector for that ultimate ease of mind. SPEEDCON connections are effortless to install, simply push the M12 connector into its mating part, turn and you're set.

Network cables are designed to allow you to have the most speed and efficiency on your network through a cable. The NBC-MSD cables come pre-wired and so all that you need to do is simply plug the cable in. Please bear in mind, these cables are not your conventional cables and include an M12 connector on one end. The M12 connector simply just needs to be pushed in and locked in.

Cat 5 is a terminology that means 'category 5'. Category 5 cables are twisted pair cables that allow you to connect to network devices via cabling. Cat 5 cables are terminated by an RJ45 port on at least one of the ends and can transmit speeds of up to 100 Mbps.

GOST

Bridge the gap between PCs and the internet using this Ethernet cable from Phoenix Contact. It's a Cat5 cable capable of data transfer speeds of up to 100Mbps, so it supports fast communication between devices. You'll find an M12 connector on one end and an RJ45 male connector on the other, letting you hook up compatible machinery with ease. Foamed PE insulation around the wires reduces crosstalk and attenuation to ensure high signal integrity.
Thanks to its bare copper litz conductors, you can count on high conductivity and minimal power loss from this cable for a stable connection. Its PUR outer sheath means it's resistant to abrasion and wear for long-lasting use in harsh environments. As it has a minimum bending radius of 52mm, you can trust it's flexible enough to install around corners and in complex setups.

• IP67 rating on the M12 connector means it's dustproof and resistant to immersion in 1m of water for 30 minutes
• Broad operating temperature range from -20°C to +80°C for use in demanding settings
• High tensile strength of 80N assures you it won't stretch or break easily
• Tinned copper wire braid protects against EMI for noiseless signal transmission