Broadcom AFBR-S6PY2626 Environmental Sensor for Gas Leak Detectors & Alarm
- N° de stock RS:
- 281-3002
- Référence fabricant:
- AFBR-S6PY2626
- Fabricant:
- Broadcom
Sous-total (1 unité)*
44,22 €
(TVA exclue)
53,51 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- Plus 100 unité(s) expédiée(s) à partir du 26 février 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 44,22 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 281-3002
- Référence fabricant:
- AFBR-S6PY2626
- Fabricant:
- Broadcom
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Broadcom | |
| Product Type | Environmental Sensor | |
| Response Time | 10ms | |
| Application | Gas Leak Detectors & Alarm | |
| Sub Type | Pyroelectric Extended Infrared | |
| Mount Type | Surface | |
| Minimum Supply Voltage | 1.75V | |
| Maximum Supply Voltage | 3.6V | |
| Minimum Operating Temperature | -40°C | |
| Package Type | Surface Mount | |
| Maximum Operating Temperature | 85°C | |
| Series | ezPyro | |
| Width | 3.7 mm | |
| Height | 1.75mm | |
| Standards/Approvals | No | |
| Length | 5.65mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Broadcom | ||
Product Type Environmental Sensor | ||
Response Time 10ms | ||
Application Gas Leak Detectors & Alarm | ||
Sub Type Pyroelectric Extended Infrared | ||
Mount Type Surface | ||
Minimum Supply Voltage 1.75V | ||
Maximum Supply Voltage 3.6V | ||
Minimum Operating Temperature -40°C | ||
Package Type Surface Mount | ||
Maximum Operating Temperature 85°C | ||
Series ezPyro | ||
Width 3.7 mm | ||
Height 1.75mm | ||
Standards/Approvals No | ||
Length 5.65mm | ||
- Pays d'origine :
- MY
The Broadcom thin film pyroelectric infrared (IR) sensors for gas detection and other substance concentration measurements, The main use of this high sensitivity device is CO2 detection. It is High-performance current mode sensor that achieves a signal-to-noise of 10,000 and offers a fast, stable response over a wide operating frequency range. The sensor elements are built into a low noise circuit that has an internal CMOS op amp, with a 10 GΩ feedback resistor outputting a voltage signal centered on half the supply rail. This product is lead-free and compliant with RoHS.
High sensitivity
Thermally stable to slow drift and thermal shock
Extended temperature range
Less external gain required
Reliable and easy to use
Liens connexes
- Broadcom AFBR-S6PY2626, Environment Sensor for Gas Leak Detectors & Alarms
- Broadcom AFBR-S6PY2486, Environment Sensor for Gas Leak Detectors & Alarms
- Broadcom AFBR-S6PY3151, Environment Sensor for Gas Leak Detectors & Alarms
- Broadcom AFBR-S6PY3200, Environment Sensor for Gas Leak Detectors & Alarms
- Broadcom AFBR-S6PY2572, Environment Sensor for Gas Leak Detectors & Alarms
- Broadcom AFBR-S6PY0234, Environment Sensor for Gas Leak Detectors & Alarms
- Broadcom AFBR-S6EPR44352, Environment Sensor for Gas Leak Detectors & Alarms
- Broadcom AFBR-S6EPR44252, Environment Sensor for Gas Leak Detectors & Alarms