SGX Sensors BLD02 Carbon Monoxide, Hydrogen Sulphide Gas Sensor IC for Automotive
- N° de stock RS:
- 254-1498
- Référence fabricant:
- BLD02
- Fabricant:
- SGX Sensors
Offre groupée disponible
Sous-total (1 unité)*
45,45 €
(TVA exclue)
54,99 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- Plus 21 unité(s) expédiée(s) à partir du 02 mars 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 45,45 € |
| 5 - 9 | 43,03 € |
| 10 - 19 | 39,38 € |
| 20 + | 38,62 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 254-1498
- Référence fabricant:
- BLD02
- Fabricant:
- SGX Sensors
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SGX Sensors | |
| Product Type | Gas Sensor IC | |
| Gases Detected | Carbon Monoxide, Hydrogen Sulphide | |
| Accuracy | -10 to 10 % | |
| Response Time | 1s | |
| Application | Automotive | |
| Mount Type | PCB | |
| Minimum Supply Voltage | 9V | |
| Maximum Supply Voltage | 18V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Width | 35 mm | |
| Length | 39mm | |
| Height | 27mm | |
| Standards/Approvals | RoHS | |
| Weight | 15g | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque SGX Sensors | ||
Product Type Gas Sensor IC | ||
Gases Detected Carbon Monoxide, Hydrogen Sulphide | ||
Accuracy -10 to 10 % | ||
Response Time 1s | ||
Application Automotive | ||
Mount Type PCB | ||
Minimum Supply Voltage 9V | ||
Maximum Supply Voltage 18V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Width 35 mm | ||
Length 39mm | ||
Height 27mm | ||
Standards/Approvals RoHS | ||
Weight 15g | ||
Automotive Standard No | ||
- Pays d'origine :
- PL
The SGX Sensors are a Battery Failure Detection sensors that measures H2 concentration when different battery leakage occur through CAN communication. The module has to be placed in the battery enclosure allowing to sense H2 gas generated during a failure mode. BLD2 solution allow Battery Management System (BMS) to monitor the safe operation of the battery and send an earlier signal during a thermal runaway warning to give time to passengers to leave the vehicle safely.
Automotive product
Fast response time (<1 second)
Thermal conductivity gas sensor (high reliability technology)
High H2 range detection from 0 up to 10%
CO gas sensor (able to detect the venting phase before Thermal Runaway)
Low Power consumption (50mA)
CAN 500kbps High Speed communication
Standard automotive 4 pins connector
Watertight housing IP6K7
Liens connexes
- SGX Sensors BLD02 Hydrogen Sulphide Gas Sensor IC for Automotive
- SGX Sensors SGX-4DT Hydrogen Sulphide Gas Sensor IC for Portable Gas Detectors
- SGX Sensors TRDU5 Carbon Monoxide, Hydrogen Gas Sensor IC for Portable Gas Detectors
- SGX Sensors SGX-4H2S-100, Hydrogen Sulphide Gas Sensor IC for H2S Detectors
- SGX Sensors SGX-SURECO, Carbon Monoxide Gas Sensor IC for CO Detectors
- SGX Sensors SGX-4CO, Carbon Monoxide Gas Sensor IC for CO Detectors
- SGX Sensors PS4-H2S-100, Hydrogen Sulphide Gas Sensor IC for Gas Leak Detector for Gas Appliances
- SGX Sensors PS1-H2S-500, Hydrogen Sulphide Gas Sensor IC for Gas Leak Detector for Gas Appliances