SGX Sensors BLD01 Hydrogen Gas Sensor IC for Automotive
- N° de stock RS:
- 254-1495
- Référence fabricant:
- BLD01
- Fabricant:
- SGX Sensors
Offre groupée disponible
Sous-total (1 unité)*
43,30 €
(TVA exclue)
52,39 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 22 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 43,30 € |
| 5 - 9 | 40,98 € |
| 10 - 19 | 37,49 € |
| 20 + | 36,76 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 254-1495
- Référence fabricant:
- BLD01
- Fabricant:
- SGX Sensors
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SGX Sensors | |
| Gases Detected | Hydrogen | |
| Product Type | Gas Sensor IC | |
| Accuracy | -10 to 10 % | |
| Response Time | 1s | |
| Application | Automotive | |
| Mount Type | PCB | |
| Minimum Supply Voltage | 9V | |
| Maximum Supply Voltage | 18V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Standards/Approvals | RoHS | |
| Height | 27mm | |
| Width | 35 mm | |
| Length | 39mm | |
| Weight | 15g | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque SGX Sensors | ||
Gases Detected Hydrogen | ||
Product Type Gas Sensor IC | ||
Accuracy -10 to 10 % | ||
Response Time 1s | ||
Application Automotive | ||
Mount Type PCB | ||
Minimum Supply Voltage 9V | ||
Maximum Supply Voltage 18V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Standards/Approvals RoHS | ||
Height 27mm | ||
Width 35 mm | ||
Length 39mm | ||
Weight 15g | ||
Automotive Standard No | ||
- Pays d'origine :
- PL
The SGX Sensors are a Battery Failure Detection sensors that measures H2 concentration when different battery leakage occur through CAN communication. The module has to be placed in the battery enclosure allowing to sense H2 gas generated during a failure mode. BLD1 solution allow Battery Management System (BMS) to monitor the safe operation of the battery and send an earlier signal during a thermal runaway warning to give time to passengers to leave the vehicle safely.
Automotive product
Fast response time (<1 second)
Thermal conductivity gas sensor (high reliability technology)
High H2 range detection from 0 up to 10%
Low Power consumption (25mA)
CAN 500kbps High Speed communication
Standard automotive 4 pins connector
Watertight housing IP6K7
Liens connexes
- SGX Sensors Hydrogen Gas Sensor IC for Automotive
- SGX Sensors Carbon Monoxide, Hydrogen Sulphide Gas Sensor IC for Automotive
- SGX Sensors BLD02 Carbon Monoxide, Hydrogen Sulphide Gas Sensor IC for Automotive
- SGX Sensors Hydrogen Sulphide Gas Sensor IC for H2S Detectors
- SGX Sensors SGX-4H2S-100 Hydrogen Sulphide Gas Sensor IC for H2S Detectors
- SGX Sensors Hydrogen Gas Sensor IC for Gas Leak Detector for Gas Appliances
- SGX Sensors Hydrogen Gas Sensor for Hydrogen Gas Detection
- SGX Sensors PS4-H2-1000 Hydrogen Gas Sensor IC for Gas Leak Detector for Gas Appliances
