STEGO D084 Series Plastic Pressure Compensation Element for Use with Enclosure 30.5 mm x 65.5 mm x 65.5mm
- N° de stock RS:
- 270-9899
- Référence fabricant:
- 08400.0-03
- Fabricant:
- STEGO
Sous-total (1 sachet de 2 unités)*
13,24 €
(TVA exclue)
16,02 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 46 unité(s) prête(s) à être expédiée(s)
- Plus 280 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | Le Sachet* |
|---|---|---|
| 2 + | 6,62 € | 13,24 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 270-9899
- Référence fabricant:
- 08400.0-03
- Fabricant:
- STEGO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | STEGO | |
| Product Type | Pressure Compensation Element | |
| Accessory Type | Pressure Compensation Element | |
| Length | 65.5mm | |
| For Use With | Enclosure | |
| Width | 65.5mm | |
| Material | Plastic | |
| Height | 30.5mm | |
| Colour | Light Grey | |
| IP Rating | IP55 | |
| Series | D084 | |
| Standards/Approvals | RoHS | |
| Hazardous Area Certification | No | |
| Sélectionner tout | ||
|---|---|---|
Marque STEGO | ||
Product Type Pressure Compensation Element | ||
Accessory Type Pressure Compensation Element | ||
Length 65.5mm | ||
For Use With Enclosure | ||
Width 65.5mm | ||
Material Plastic | ||
Height 30.5mm | ||
Colour Light Grey | ||
IP Rating IP55 | ||
Series D084 | ||
Standards/Approvals RoHS | ||
Hazardous Area Certification No | ||
- Pays d'origine :
- DE
The STEGO Pressure Compensation Device is used in a tightly closed enclosure where pressure differentials can occur during extreme temperature variations. The pressure compensation device DA 084 permits a controlled change in pressure and avoids the entering of dust and water. The pressure compensation device is suitable for the use in enclosures and housings in accordance with DIN EN 62208.
Easy to install
5 Nm torque
High degree of protection of IP55
Gross weight is 62 g with 32 g per piece
Liens connexes
- STEGO D084 Series Plastic Draining Plug for Use with Enclosure 49.5 mm x 60 mm x 60 mm
- STEGO D284 Series Plastic Pressure Compensation Element for Use with Enclosure 33.5 mm x 70 mm x 70 mm
- STEGO D284 Series Pressure Compensation Element 37 mm H For Use With Enclosure
- STEGO D284 Series M40 Pressure Compensation Element 31 mm H For Use With Enclosure
- STEGO D284 Series M40 Pressure Compensation Element 37 mm H For Use With Enclosure
- STEGO D284 Series M12 Pressure Compensation Element 21 mm H For Use With Enclosure
- Eaton XSFH20 Series Metal Accessory Kit for Use with Enclosure 1910 mm x 40 mm x 65.5 mm
- Eaton XTPPCCV2-H500W1000 Series Steel Partition for Use with Power Feeder 607 mm x 65.5 mm x 987 mm