RS PRO Enclosure Heater, 230V ac, 300W Output, 300W Input 182mm x 133 mm
- N° de stock RS:
- 754-5535
- Fabricant:
- RS PRO
Visuel non contractuel
Bénéficiez d'une remise sur les achats en gros
Ajoutez 10 de plus pour économiser 3%
Consulter les options de prix de grosSous-total (1 unité)*
109,79 €
(TVA exclue)
132,85 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 18 unité(s) expédiée(s) à partir du 11 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | Économie |
|---|---|---|
| 1 - 9 | 109,79 € | - |
| 10 - 24 | 106,05 € | 3% |
| 25 - 49 | 100,45 € | 8% |
| 50 - 99 | 92,99 € | 15% |
| 100 + | 87,85 € | 19% |
*Prix donné à titre indicatif
- N° de stock RS:
- 754-5535
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Output Power | 300W | |
| Product Type | Enclosure Heater | |
| Input Power | 300W | |
| Supply Voltage | 230V ac | |
| Depth | 133mm | |
| Width | 182mm | |
| IP Rating | IP20 | |
| Ventilated fan | Yes | |
| Insulated PTC | No | |
| Minimum Operating Temperature | -55°C | |
| Maximum Operating Temperature | 155°C | |
| Standards/Approvals | RoHS | |
| Frequency | 60Hz | |
| Nominal Current | 1.3A | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Output Power 300W | ||
Product Type Enclosure Heater | ||
Input Power 300W | ||
Supply Voltage 230V ac | ||
Depth 133mm | ||
Width 182mm | ||
IP Rating IP20 | ||
Ventilated fan Yes | ||
Insulated PTC No | ||
Minimum Operating Temperature -55°C | ||
Maximum Operating Temperature 155°C | ||
Standards/Approvals RoHS | ||
Frequency 60Hz | ||
Nominal Current 1.3A | ||
- Pays d'origine :
- GB
RS PRO Anti-Condensation Heaters
A robust anti-condensation heater designed for use in switch gear and control gear cabinets where a low wattage solution is essential to prevent condensation by maintaining the temperature above dew point.
A hardwearing condensation heater constructed from a vitreous enamelled resistor mounted in a sturdy sheet Steel casing surrounded by a protective and removable perforated sheet Steel cover.;Featuring a cable grommet on both ends providing a tight and secure cable terminated with M4 terminal screws for easy installation.
A high-quality low wattage solution to condensation protecting sensitive parts and electronics perfect for switch and control cabinets.
Features and Benefits
Note: The recommended power rating required is 10W per square metre of enclosing surface, excluding the base. They should be mounted on a back surface with the heating element horizontal and the terminals at the bottom
Why RS PRO?
Looking to reduce costs but keep the same quality?
With a choice of over 65,000 products – all of which are rigorously tested against demanding industry standards before they are given the RS PRO seal of approval.
Trusted by engineers the world over, we want you to be confident that you’re receiving the exceptional quality, reliability and the best value for money.
Note
The recommended power rating required is 10W per square metre of enclosing surface, excluding the base. They should be mounted on a back surface with the heating element horizontal and the terminals at the bottom.
Liens connexes
- RS PRO 230V ac 550W Input 182mm x 133 mm
- RS PRO 230V ac 475W Input 182mm x 133 mm
- Pfannenberg 230V 300W Input 88mm x 126 mm
- Siemens Fan Heater 300W Output, 300W Input 119mm x 22 mm
- Siemens Fan Heater 300W Output, 300W Input 119mm x 47 mm
- Pfannenberg 230V ac 300W Input 164mm x 164 mm
- Pfannenberg 230V ac 315W Input 126mm x 126 mm
- RS PRO 230V ac 1000W Input 182mm x 153 mm