Schneider Electric Enclosure Heater, 110V ac, 250 V ac, 150W Output, 150W Input 80mm x 70 mm
- N° de stock RS:
- 177-8992
- Référence fabricant:
- NSYCR150WU2
- Fabricant:
- Schneider Electric
Sous-total (1 unité)*
159,68 €
(TVA exclue)
193,21 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 2 unité(s) prête(s) à être expédiée(s)
- Plus 9 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 159,68 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 177-8992
- Référence fabricant:
- NSYCR150WU2
- Fabricant:
- Schneider Electric
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Schneider Electric | |
| Product Type | Enclosure Heater | |
| Output Power | 150W | |
| Input Power | 150W | |
| Supply Voltage | 110V ac, 250V ac | |
| Depth | 70mm | |
| Mount Type | DIN Rail | |
| Width | 80mm | |
| IP Rating | IP20 | |
| Insulated PTC | Yes | |
| Mounting Position | Vertical | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 70°C | |
| Standards/Approvals | UL, REACH (Reference not containing SVHC above the threshold), VDE, RoHS (since 0940 - Schneider Electric Declaration ) | |
| Frequency | 60Hz | |
| Series | ClimaSys CR | |
| Sélectionner tout | ||
|---|---|---|
Marque Schneider Electric | ||
Product Type Enclosure Heater | ||
Output Power 150W | ||
Input Power 150W | ||
Supply Voltage 110V ac, 250V ac | ||
Depth 70mm | ||
Mount Type DIN Rail | ||
Width 80mm | ||
IP Rating IP20 | ||
Insulated PTC Yes | ||
Mounting Position Vertical | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 70°C | ||
Standards/Approvals UL, REACH (Reference not containing SVHC above the threshold), VDE, RoHS (since 0940 - Schneider Electric Declaration ) | ||
Frequency 60Hz | ||
Series ClimaSys CR | ||
Schneider Electric ClimaSys CR Series Enclosure Heater, 150W Output Power, 110/250V AC Supply Voltage - NSYCR150WU2
This enclosure heater provides controlled internal warming for electrical cabinets and sealed enclosures, maintaining suitable ambient conditions for sensitive components across a broad temperature span. It is designed for vertical attachment to DIN rails and operates from a wide AC supply, offering a Compact solution where condensation prevention and temperature moderation are required.
Features & Benefits
• 150W output delivering steady thermal support for cabinet interiors
• Insulated PTC element minimises overheating risk while auto-regulating
• 110/250V AC input supports 50/60Hz systems for global compatibility
• IP20 protection enables use inside non-watertight electrical enclosures
• Vertical DIN rail mounting clips allow Rapid installation on 35mm rails
• Rated for -40 to 70°C ambient operation for extreme climate resilience
• Insulated PTC element minimises overheating risk while auto-regulating
• 110/250V AC input supports 50/60Hz systems for global compatibility
• IP20 protection enables use inside non-watertight electrical enclosures
• Vertical DIN rail mounting clips allow Rapid installation on 35mm rails
• Rated for -40 to 70°C ambient operation for extreme climate resilience
Applications
• Suitable for preventing condensation in control cabinets
• Ideal for maintaining temperature-sensitive electronics in automation racks
• Used for temperature stabilisation of PLC and relay panels
• Can be used for preserving battery performance in enclosure systems
• Suitable for use within industrial panel assemblies requiring anti-condensation heating
• Ideal for maintaining temperature-sensitive electronics in automation racks
• Used for temperature stabilisation of PLC and relay panels
• Can be used for preserving battery performance in enclosure systems
• Suitable for use within industrial panel assemblies requiring anti-condensation heating
What mounting hardware is required for installation?
It clips directly onto a 35mm DIN rail and is intended for vertical positioning, so no additional bracketry is necessary beyond standard rail fixings.
How should the device be integrated electrically?
Connect to an AC supply within the 110 to 250V range and include appropriate electrical protection and a thermal controller as part of the enclosure’s wiring scheme.
What material and construction support heat dissipation?
The unit is housed in an extruded aluminium body that aids thermal transfer from the PTC element into the enclosure air.
Is the unit suitable for use in sealed enclosures?
It is intended for use inside air-sealed enclosures where internal circulation and a controller manage temperature, not for direct external exposure.
Liens connexes
- Schneider Electric Enclosure Heater 250 V ac 150W Input 60mm x 90 mm
- Pfannenberg 110V ac 150W Output, 150W Input 70mm x 50 mm
- Eaton Enclosure Heater 250 V, 150W Output 70mm x 50 mm
- STEGO Enclosure Heater 150W Output, 150W Input 80mm x 112 mm
- nVent HOFFMAN Enclosure Heater 250 V 150W Input 70mm x 50 mm
- STEGO 230V ac 150W Input 80mm x 160 mm
- RS PRO 110V ac 150W Input 67mm x 191 mm
- Pfannenberg 110V ac 100W Output, 150W Input 60mm x 102 mm