Bopla ABS Fixed Feet for Use with Ultramas Enclosure
- N° de stock RS:
- 161-8472
- Référence fabricant:
- 56012000 UM-AS
- Fabricant:
- Bopla
Sous-total (1 sachet de 4 unités)*
5,39 €
(TVA exclue)
6,52 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 2 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Sachet(s) | Le Sachet | Prix par unité* |
|---|---|---|
| 1 + | 5,39 € | 1,348 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 161-8472
- Référence fabricant:
- 56012000 UM-AS
- Fabricant:
- Bopla
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Bopla | |
| Accessory Type | Fixed Feet | |
| Product Type | Feet | |
| For Use With | Ultramas Enclosure | |
| Material | ABS | |
| Colour | Light Grey | |
| Standards/Approvals | No | |
| Hazardous Area Certification | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Bopla | ||
Accessory Type Fixed Feet | ||
Product Type Feet | ||
For Use With Ultramas Enclosure | ||
Material ABS | ||
Colour Light Grey | ||
Standards/Approvals No | ||
Hazardous Area Certification No | ||
Bopla Tip-up Foot Set
Bopla feet for use with Ultramas Enclosure
• ABS Ultramas
• 4 Fixed Feet
• Operating temperature: +70 °C to -25 °C
• For horizontal or vertical use, as required
Ultramas Housings
Desk enclosures for electronics equipment.
May be used in either a horizontal or vertical position.
Feature lower and upper air vents.
Bosses for European standard size cards are located inside the enclosure shells.
Grooves for vertical installation of cards are located on the enclosure sides.
A set of two folding feet and two fixed feet, as well as the front and rear panels, may be ordered separately.
Liens connexes
- Bopla ABS Feet for Use with Ultramas Enclosures 58 mm x 17 mm x 22mm
- Bopla Ultramas Grey ABS Enclosure 62.2 mm 258.9 mm
- Bopla Ultramas Grey ABS Enclosure 62.2 mm 258.9 mm
- Bopla Ultramas Grey Aluminium Enclosure 62.2 mm 198.9 mm
- Bopla Ultramas Grey Plastic Enclosure 62.2 mm 198.9 mm
- Bopla Ultramas Light Grey Plastic Enclosure 62.2 mm 198.9 mm
- Bopla Ultramas Series Light Grey Light Grey Lid ABS General Purpose Enclosure 198.9 mm x 157.5 mm x 62.2 mm
- Bopla Ultramas Series Light Grey Light Grey Lid ABS General Purpose Enclosure 198.9 mm x 157.5 mm x 62.2 mm
