EAO 84 Series Twist Release Emergency Stop Push Button, Panel Mount, 22.5 mm Cutout, 2 NC, IP65
- N° de stock RS:
- 690-6960
- Numéro d'article Distrelec:
- 300-10-856
- Référence fabricant:
- 84-5040.0020
- Fabricant:
- EAO
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau en stock, il n'est plus vendu par le fabricant.
Produit de remplacement
Ce produit n'est pas disponible actuellement. Voici notre produit de remplacement:
la pièce
41,14 €
(TVA exclue)
49,78 €
(TVA incluse)
- N° de stock RS:
- 690-6960
- Numéro d'article Distrelec:
- 300-10-856
- Référence fabricant:
- 84-5040.0020
- Fabricant:
- EAO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | EAO | |
| Mount Type | Panel Mount | |
| Product Type | Emergency Stop Push Button | |
| Cutout Diameter | 22.5mm | |
| Contact Configuration | 2 NC | |
| Push Button Actuation | Twist Release | |
| Series | 84 | |
| Illuminated | No | |
| IP Rating | IP65 | |
| Colour | Red | |
| Contact Current | 5A | |
| Contact AC Voltage | 250V ac | |
| Contact DC Voltage | 250V dc | |
| Head Style | Mushroom | |
| Switch Configuration | Slow Make | |
| Hazardous Area Certification | NO | |
| Head Diameter | 32mm | |
| Standards/Approvals | DIN EN ISO 13850EN 60204-1, EN IEC 60947-5-5 | |
| Length | 30mm | |
| Push Button Material | Plastic | |
| Sélectionner tout | ||
|---|---|---|
Marque EAO | ||
Mount Type Panel Mount | ||
Product Type Emergency Stop Push Button | ||
Cutout Diameter 22.5mm | ||
Contact Configuration 2 NC | ||
Push Button Actuation Twist Release | ||
Series 84 | ||
Illuminated No | ||
IP Rating IP65 | ||
Colour Red | ||
Contact Current 5A | ||
Contact AC Voltage 250V ac | ||
Contact DC Voltage 250V dc | ||
Head Style Mushroom | ||
Switch Configuration Slow Make | ||
Hazardous Area Certification NO | ||
Head Diameter 32mm | ||
Standards/Approvals DIN EN ISO 13850EN 60204-1, EN IEC 60947-5-5 | ||
Length 30mm | ||
Push Button Material Plastic | ||
- Pays d'origine :
- CH
EAO Emergency Stop Push Button, 2NC, IP65 - 84 Series - 84-5040.0020
To quickly shut off your machines in the event of an emergency, use this push button from EAO. It's a maintained switch, so it keeps your machinery off until you actuate the switch again for enhanced safety. Thanks to its IP65 rating, it's fully protected against dust and low-pressure water jets for safe use in harsh industrial environments. It features a plug terminal for a simple electrical connection, saving you time and effort during installation.
Features & Benefits
• Gold contacts are highly conductive and resistant to corrosion for a reliable electrical connection
• Plastic lens material is resistant to impact and wear for durability
• Light weight of 0.028kg to place minimal strain on your panel
• Mushroom-shaped head makes it easy to grasp for ease of actuation
Applications
• Transport systems
• Conveyor belts
• Machinery control panels
How much space does this push button take up on a panel?
This push button has a compact cutout diameter of 22.5mm and a front diameter of 32mm, so it will take up only minimal space on a busy panel.
Series 84 Low Profile Emergency Stop Switch
The range of 84 was introduced to satisfy demands of both equipment builders and users. Typical usage covers the following areas: machinery and process control equipment, including production lines, cranes, robots, moving platforms, as well as security systems and emergency exists.
Within the many different colours, the lenses are available either in plastic or anodised aluminium.
To meet modern assembly standards, this range is connected to PCBs.
The Series 84 of Low Profile Emergency Stop Swathes are useful for small control panels. If space is at a premium, Series 84 can be easily used as they are portable and compactable. A yellow protection guard is available to stop accidental activation.
The Series 84 pushbuttons are suited to a range of industrial applications and guarantee reliable switching even of every light loads.
The range requires no additional assembly because of its ’monoblock’design.
The double-break switching system can be supplied for the following switching functions:
•1 NC, 2 NC, 1 NC + 1 NO
Electrical Characteristics
New standards in emergency-stop switches comply with EN IEC 60947-5-1, EN IEC 60947-5-5 (Emergency-stop), EN ISO13850, EN 60947-5-1.
The IEC stands for International Electrotechnical Commission) and is the world’s leading organisation for the preparation and publication of International standards for all electrical, electronic and related technologies.
Environmental conditions
Operating temperature
-25°C … +65°C
Storage temperature
-25°C … +80°C
The front protection is regulated by IP65, which is rated as ’’dust tight’’ and protected against water projected from a nozzle.
They are used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc.) and moisture.
The numbers that follow IP each have a specific meaning and they represent the following:
•First Digit (intrusion protection)
•Second Digit (moisture protection)
Approvals
Approbations
UL (Underwriters Laboratories), is a world leader in product safety testing and certification
SEV (Swiss Designation)
Approvals
UL Recognised
Standards
DIN EN ISO 13850
Liens connexes
- EAO 84 Series Twist Release Emergency Stop Push Button 22.5 mm Cutout IP65
- EAO 84 Series Twist Release Emergency Stop Push Button 22.5 mm Cutout IP65
- EAO 84 Series Twist Release Illuminated Emergency Stop Push Button 22.5 mm Cutout IP65
- EAO 84 Series Twist Release Illuminated Emergency Stop Push Button 22.5 mm Cutout IP65
- EAO 84 Series Twist Release Emergency Stop Push Button 22.5 mm Cutout IP65
- EAO Twist Release Emergency Stop Push Button 22.5 mm Cutout, IP65
- EAO 84 Series Twist Release Emergency Stop Push Button 22 mm Cutout IP65
- EAO 84 Series Twist Release Emergency Stop Push Button 22 mm Cutout IP65