APEM A01ES Series Twist Release Emergency Stop Push Button, Panel Mount, 16 mm Cutout, 2 NC, IP65

•Operating temperature : -20°C to +55°C;•Sealing options : front panel IP65, rear panel IP40 according to EN60947-5-5;•Electrical function : push to shut off, twist to release;•Current/voltage rating : AC-15 1,5A 250VAC, 6A 250VAC;•Electrical life : 6.050 cycles;•Insulation resistance : 50MΩ min;•Dielectric test voltage : 2900V;•Mechanical life : 6050 cycles;•Operator case : polyetherimide;•Actuator : polycarbonate;•Switch block : PBT;•Panel seal : neoprene

What is the different between a push button switch for an emergency stop and a general-purpose push button switch?;A general-purpose push button switch is used for controls, e.g. to start machine operation or simply to switch modes. An emergency stop push button switch however, is mainly used as a safety measure to stop hazardous events.;What is Trigger Action?;A standard operator can be teased enough to open a normally closed contact without latching into the depressed position. Trigger action units are spring loaded so they only depress the contact block after it latches into the depressed position.

Modular construction illuminated and non illuminated Pushbutton, Keylock, Rotary and Emergency Stop switches to fit industry standard 16mm diameter cut-outs. Round, square and rectangular operators can be fitted to single, double, three and four pole switch blocks for a variety of applications. A complete Pushbutton switch assembly requires an operator, switch block, lens and lamp (if illuminated). Keylock and Rotary switches require an operator and switch block, while the Emergency Stop switch comes as a complete assembly supplied with a double pole N/C switch block and a yellow self adhesive label.

Panel sealing to IP65

Single and double pole PCB socket accessories are suitable for illuminated pushbuttons only.

BEAB, VDE, UL & CSA (Emergency Stop, VDE, UL & CSA only)