Omron A22NE-P Series Turn Reset Emergency Stop Push Button, Panel Mount, 22 mm Cutout, 2 NC, IP65
- N° de stock RS:
- 174-4223
- Numéro d'article Distrelec:
- 301-10-737
- Référence fabricant:
- A22NE-S-P202-N
- Fabricant:
- Omron
Sous-total (1 unité)*
54,19 €
(TVA exclue)
65,57 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 14 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 54,19 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 174-4223
- Numéro d'article Distrelec:
- 301-10-737
- Référence fabricant:
- A22NE-S-P202-N
- Fabricant:
- Omron
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Omron | |
| Mount Type | Panel Mount | |
| Product Type | Emergency Stop Push Button | |
| Cutout Diameter | 22mm | |
| Contact Configuration | 2 NC | |
| Push Button Actuation | Turn Reset | |
| Illuminated | No | |
| Series | A22NE-P | |
| IP Rating | IP65 | |
| Colour | Red | |
| Terminal Type | Spring Clamp | |
| Depth | 71.5mm | |
| Head Diameter | 30mm | |
| Hazardous Area Certification | No | |
| Length | 71.5mm | |
| Standards/Approvals | No | |
| Width | 71.5mm | |
| Safety Contacts | 2 | |
| Sélectionner tout | ||
|---|---|---|
Marque Omron | ||
Mount Type Panel Mount | ||
Product Type Emergency Stop Push Button | ||
Cutout Diameter 22mm | ||
Contact Configuration 2 NC | ||
Push Button Actuation Turn Reset | ||
Illuminated No | ||
Series A22NE-P | ||
IP Rating IP65 | ||
Colour Red | ||
Terminal Type Spring Clamp | ||
Depth 71.5mm | ||
Head Diameter 30mm | ||
Hazardous Area Certification No | ||
Length 71.5mm | ||
Standards/Approvals No | ||
Width 71.5mm | ||
Safety Contacts 2 | ||
- Pays d'origine :
- JP
Omron A22NE-P Series Emergency Stop Push Button, Red, 22mm Cutout Diameter - A22NE-S-P202-N
This emergency stop push button is a Compact safety actuator designed to provide Rapid manual shutdown in industrial control panels and machinery. It is intended for panel mounting where a robust, non‑illuminated push‑to‑stop device with a twist‑to‑reset action is required. The control is built to withstand routine use in production, assembly and service environments while offering straightforward reset operation after an emergency intervention.
Features & Benefits
• 2NC contact arrangement provides positive circuit opening for safety
• Turn reset mechanism enables secure latch release after activation
• Spring clamp terminals allow fast, tool‑free wiring
• IP65 ingress protection resists dust and water jets
• 30mm head improves manual accessibility under stress
• Non‑illuminated design eliminates unnecessary power consumption
• Turn reset mechanism enables secure latch release after activation
• Spring clamp terminals allow fast, tool‑free wiring
• IP65 ingress protection resists dust and water jets
• 30mm head improves manual accessibility under stress
• Non‑illuminated design eliminates unnecessary power consumption
Applications
• Suitable for emergency isolation on automated assembly lines
• Ideal for control panels in electrical and mechanical workshops
• used with conveyor systems requiring Rapid shutdown
• Can be used for safety cut‑off on test rigs and fixtures
• Suitable for retrofit of manufacturing machinery control stations
• Ideal for control panels in electrical and mechanical workshops
• used with conveyor systems requiring Rapid shutdown
• Can be used for safety cut‑off on test rigs and fixtures
• Suitable for retrofit of manufacturing machinery control stations
What panel hole size do I need for mounting?
The device requires a 22mm cut‑out for correct panel installation and retention.
How deep should the enclosure be to accommodate the unit?
Allow for a 71.5mm rear depth to ensure the actuator and terminations fit without obstruction.
What reset action is required to return the device to service?
After activation the button must be rotated to release the latch and restore the operating position.
How are electrical connections MADE to the device?
Conductors are secured into spring clamp terminals that accept stranded or solid wire for reliable contact.
Is the head colour useful for Visual identification?
The red head provides a clear Visual indicator of an emergency control point in operational areas.
Liens connexes
- Omron A22NE-P Series Turn Reset Emergency Stop Push Button 22 mm Cutout IP65
- Omron A22NE-P Series Turn Reset Illuminated Emergency Stop Push Button 22 mm Cutout IP65
- Omron A22NE Series Emergency Stop Push Button Head 40 mm Diameter
- Omron A22NE Series Emergency Stop Push Button Head 30 mm Diameter
- Omron A22NE-P Series Turn Reset Emergency Stop Push Button 22 mm Cutout IP65
- Omron A22NE-PD Series Turn Reset Emergency Stop Push Button 22 mm Cutout IP65
- Omron A22NE-PD Series Turn to Reset Illuminated Emergency Stop Push Button 22 mm Cutout IP65
- Omron A22NE-PD Series Turn Reset Emergency Stop Push Button 22 mm Cutout IP69K, IP65