Banner SSA-EB Series Illuminated Emergency Stop Push Button, Panel Mount, 30 mm Cutout, IP65
- N° de stock RS:
- 293-676
- Référence fabricant:
- SSA-EB1PL2-12
- Fabricant:
- Banner
Sous-total (1 unité)*
107,93 €
(TVA exclue)
130,60 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stocké-e par le fabricant
- Prêt à être expédié à partir du 29 mars 2027
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 107,93 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 293-676
- Référence fabricant:
- SSA-EB1PL2-12
- Fabricant:
- Banner
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Banner | |
| Product Type | Emergency Stop Push Button | |
| Mount Type | Panel Mount | |
| Cutout Diameter | 30mm | |
| Housing Material | Polyamide, Aluminium | |
| Illuminated | Yes | |
| Series | SSA-EB | |
| IP Rating | IP65 | |
| Terminal Type | M3 Screw Terminal | |
| Contact Current | 1A | |
| Head Style | Mushroom Shaped | |
| Contact DC Voltage | 30V dc | |
| Standards/Approvals | UL 508, CSA C22.2 No.14, EN/IEC 60497-5-1, EN/IEC 60947-5-5 | |
| Head Diameter | 30mm | |
| Hazardous Area Certification | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Banner | ||
Product Type Emergency Stop Push Button | ||
Mount Type Panel Mount | ||
Cutout Diameter 30mm | ||
Housing Material Polyamide, Aluminium | ||
Illuminated Yes | ||
Series SSA-EB | ||
IP Rating IP65 | ||
Terminal Type M3 Screw Terminal | ||
Contact Current 1A | ||
Head Style Mushroom Shaped | ||
Contact DC Voltage 30V dc | ||
Standards/Approvals UL 508, CSA C22.2 No.14, EN/IEC 60497-5-1, EN/IEC 60947-5-5 | ||
Head Diameter 30mm | ||
Hazardous Area Certification No | ||
- Pays d'origine :
- JP
The Banner SSA-EB Series models are mushroom style electro mechanical emergency stop push buttons. These buttons mount through a 30 mm hole in an enclosure. When the button is armed, the switch's safety contacts normally closed/NC are closed and its monitoring contacts normally open/NO, if present, are open. When the button is pushed, the switch's safety contacts open, and the monitoring contacts close. The contacts remain in this condition until they are manual rearmed.
Latching design complies with ISO 13850
Direct opening operation per EN 60947-5-1
Compliant with ANSI B11.19 and NFPA 79
Emergency Stop legend optional
Liens connexes
- Banner SSA-EB Series Illuminated Emergency Stop Push Button 30.5 mm Cutout, IP65
- Banner SSA-EB Series Illuminated Emergency Stop Push Button 30 mm Cutout IP65
- Banner SSA-EB Series Illuminated Emergency Stop Push Button Threaded Mount IP69
- Banner SSA-EB Series Twist Release Illuminated Emergency Stop Push Button 30 mm Cutout IP65
- Banner SSA-EB1 Series Illuminated Emergency Stop Push Button Threaded Mount DPST, IP69
- Banner SSA-EB Series Twist Release Illuminated Emergency Stop Push Button IP65
- Banner SSA-EB Series Illuminated Emergency Stop Push Button 30 mm Cutout IP65
- Banner SSA-EB Series Twist Release Illuminated Emergency Stop Push Button NC, IP65