RS PRO Silver Acrylic Resin Conductive Lacquer for PCB, Electronic
- N° de stock RS:
- 123-9911
- Fabricant:
- RS PRO
Offre groupée disponible
Sous-total (1 unité)*
30,30 €
(TVA exclue)
36,66 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
Temporairement en rupture de stock
- 23 unité(s) expédiée(s) à partir du 27 avril 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 14 | 30,30 € |
| 15 - 39 | 29,09 € |
| 40 + | 27,87 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 123-9911
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Product Type | Conductive Lacquer | |
| Colour | Silver | |
| Application | PCB, Electronic | |
| Product Form | Liquid | |
| Package Type | Bottle | |
| Base Material | Acrylic Resin | |
| Package Size | 5 g | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Product Type Conductive Lacquer | ||
Colour Silver | ||
Application PCB, Electronic | ||
Product Form Liquid | ||
Package Type Bottle | ||
Base Material Acrylic Resin | ||
Package Size 5 g | ||
Standards/Approvals No | ||
RS PRO Electrically Conductive Paint
This silver conductive paint is primarily used to repair PCB tracks or manually draw a simple circuit. The paint can be used in various ways including to paint-on an electrical screen, or to make electrical connections on non-solderable surfaces.
Product Features
● Touch-dry in around 10 min and usable within your circuit in 30 minutes.
● For full mechanical and electrical properties you should bake it once it is dry at between 121°C to 148°C for 5 mins to 10 mins.
Product Warnings
This paint is flammable.
How to repair a damaged PCB trace
● Identify the damaged area.
● Remove the damaged solder and PCB trace using a scalpel or sharp knife.
● Clean the affected area with a lint-free cloth and isopropyl alcohol.
● Shake bottle vigorously before beginning and replace bottle cap when not in use.
● Paint the new trace (for very fine trace lines, use electrical tape to mask off the area and remove once painted for a clean straight line).
● Leave for 30 minutes then bake for 5 to 10 minutes for maximum mechanical and electrical properties.
Note
Shake vigorously before using and replace cap when not in use.
Warning
Flammable
Liens connexes
- Chemtronics Silver Acrylic Resin Conductive Lacquer for PCB, Electronic
- Electrolube Silver Acrylic Resin Conductive Lacquer for PCB, Electronic
- RS PRO Silver Acrylic Resin Conductive Lacquer for PCB, High Temperature
- Electrolube Colourless Acrylic Resin PCB Lacquer for Electronic, PCB
- Chemtronics Silver Grey Silvered Copper Epoxy Conductive Lacquer for PCB, Electronic
- Kontakt Chemie Black Graphite Conductive Lacquer for Electronic, PCB
- Loctite Acrylic Resin Conductive Paint for Automotive
- MG Chemicals Black Acrylic Conductive Lacquer for Rf Shielding Picture Tube