ABB Modular DIN Rail Components EPD24 Electronic Circuit Breaker 10A 24V, DIN Rail current limitation 1.8 x IN (0.5-6A),
- N° de stock RS:
- 914-4617
- Référence fabricant:
- 2CDE601101R2010 EPD24-TB-101-10A
- Fabricant:
- ABB
Sous-total (1 unité)*
149,68 €
(TVA exclue)
181,11 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 25 août 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 149,68 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 914-4617
- Référence fabricant:
- 2CDE601101R2010 EPD24-TB-101-10A
- Fabricant:
- ABB
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | ABB | |
| Product Type | Electronic Circuit Breaker | |
| Range | Modular DIN Rail Components | |
| Series | EPD24 | |
| Number of Channels | 1 | |
| Current Rating | 10A | |
| Voltage | 24V | |
| Mount Type | DIN Rail | |
| Tripping Characteristics | current limitation 1.8 x IN (0.5-6A), 1.5 x IN (8-10A), trip time 100 ms...3 s at Iload > 1.8 x IN, Electronic Release, 1.1 x IN (1.05 to 1.35 x IN), 1.3 x IN (12A) | |
| Terminal Type | Screw | |
| Length | 83mm | |
| Width | 12.5mm | |
| Depth | 83mm | |
| Standards/Approvals | RoHS, UL, CSA | |
| Sélectionner tout | ||
|---|---|---|
Marque ABB | ||
Product Type Electronic Circuit Breaker | ||
Range Modular DIN Rail Components | ||
Series EPD24 | ||
Number of Channels 1 | ||
Current Rating 10A | ||
Voltage 24V | ||
Mount Type DIN Rail | ||
Tripping Characteristics current limitation 1.8 x IN (0.5-6A), 1.5 x IN (8-10A), trip time 100 ms...3 s at Iload > 1.8 x IN, Electronic Release, 1.1 x IN (1.05 to 1.35 x IN), 1.3 x IN (12A) | ||
Terminal Type Screw | ||
Length 83mm | ||
Width 12.5mm | ||
Depth 83mm | ||
Standards/Approvals RoHS, UL, CSA | ||
- Pays d'origine :
- DE
EPD24 Series Electronic Protection Device
ABB EPD24 series electronic protection devices offer overcurrent protection for 24 V dc load circuits. This protection is achieved by a combination of active electronic current limitations. In the case of a short circuit and an overload, deactivation from 1.1 x Input occurs.
If a fault occurs in a load circuit, the EPD24 protection device will detect this rapidly and reliably, disable the power output transistor, interrupting the current flow in the defective circuit. The maximum possible overcurrent is always limited to 1.3…1.8 times the selected rated current. An activation of capacitive loads up to 20,000 μF is possible, deactivation only occurring in the case of overloads or short circuits.
Selective load protection
Reliable overload disconnection with 1.1 x Input plus
Manual ON/OFF button
Clear status and failure indication through LED and integrated auxiliary contact
Integral fail-safe element adjusted to current rating
Width per unit only 12.5 mm
DIN rail mounting
Easy wiring through busbar LINE+ and 0 V as well as signal bars
Liens connexes
- ABB EPD24 EPD24 Electronic Circuit Breaker 2 A 24 V DIN Rail Electronic Trip Curve
- ABB EPD24 EPD24 Electronic Circuit Breaker 12 A 24 V DIN Rail Electronic Release, One tripping
- ABB EPD24 Electronic Circuit Breaker 4 A 24 V DIN Rail
- ABB EPD24 Electronic Circuit Breaker 3 A 24 V DIN Rail
- ABB EPD24 EPD24 Electronic Circuit Breaker 0.5 A 24 V DIN Rail Electronic Trip Curve
- ETA ESX10 ESX10-T Electronic Circuit Breaker 1 A 24 V DIN Rail
- ABB Surge Protector DIN Rail
- Socomec Surge Arrester 1.8 kV, DIN Rail