Phoenix Contact RIF-1-RPT-LDP-24DC/1ICT Series Interface Relay, DIN Rail Mount, 24V dc Coil, SPST

Voir la catégorie

Sous-total (1 unité)*

16,63 €

(TVA exclue)

20,12 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 2 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
  • Plus 26 unité(s) expédiée(s) à partir du 29 décembre 2025
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +16,63 €

*Prix donné à titre indicatif

N° de stock RS:
189-2309
Référence fabricant:
1078686
Fabricant:
Phoenix Contact
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Phoenix Contact

Coil Voltage

24V dc

Contact Configuration

SPST

Mounting Type

DIN Rail

Series

RIF-1-RPT-LDP-24DC/1ICT

Minimum Input Voltage

24V dc

Maximum Input Voltage

250V ac/dc

Switching Voltage

12 → 250V ac/dc

Terminal Type

Plug In

Depth

75mm

Height

96mm

Length

16mm

Contact Material

Silver Alloy

Input Current

18mA

Minimum Operating Temperature

-40°C

Turn Off Time

10ms

Dimensions

16 x 75 x 96mm

Turn On Time

8ms

Life

3 x 10^7 Cycles

Operating Temperature Range

-40 → +70°C

Maximum Operating Temperature

+70°C

Input Voltage Range

12 → 250V ac/dc

Accessory Type

Relay Module

For Use With

Strong capacitive loads

Relay Type

Solid State Relay

Special Features

IP20 Relay Base, LED Operation Indicator

Relay Switching Classification

Solid State Relay

Pays d'origine :
CN

Phoenix Contact Relay Module, Plug-In Terminal, SPNO - RIF-1-RPT-LDP-24DC/1ICT - 1078686


Easily adjust voltages or amplify power with this solid-state relay module from Phoenix Contact. It safely couples signals between a controller and field devices and is suitable for switching strong capacitive loads, such as LEDs (light-emitting diodes).
The relay is pre-assembled for quick and simple installation, and it includes a base and retaining bracket with an eject function and equipment marking area. A plug-in interference suppression module protects the relay by reducing voltage peaks when switching off inductive loads. It's mechanically coded to prevent you from mismatching it with other components.
Use this relay in any application that has high switch-on peaks. Its leading tungsten pre-contact can safely switch on currents of up to 800 A. The unit has an IP20 (ingress protection) rating, so it's touch-proof and protected against objects over 12 mm in size.

• Coil voltage of 24 V DC
• Input current of 18 mA
• Input and switching voltage range of 12 V AC/DC to 250 V AC/DC
• Life of 3 x 10^7 mechanical cycles
• Switching current of 100 mA
• SPNO (single pole, normally open) contact configuration
• Silver alloy contact material
• DIN rail mounting type
• Dimensions of 16 (length) x 75 (depth) x 96 mm (height)
• Operating temperature range of -40°C to +70°C

Liens connexes