Name: Phoenix Contact RIF-1-RSC-LDP-12DC/1X21 Series Interface Relay, DIN Rail, 12V dc Coil, SPDT, 4.2mA, 4.5 mA
Brand: Phoenix Contact
SKU: 174-3563
Price: 9.92 EUR
Availability: LimitedAvailability

Unité

sélectionner ou taper la quantité

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Phoenix Contact
	Product Type	Interface Relay
	Coil Voltage	12V dc
	Contact Configuration	SPDT
	Mount Type	DIN Rail
	Series	RIF-1-RSC-LDP-12DC/1X21
	Terminal Type	Screw
	Switching Current	10mA
	Switching AC Voltage	250V ac
	Coil Current	4.2, 4.5mA
	Switching DC Voltage	250V dc
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	70°C
	Contact Material	Silver Alloy
	Standards/Approvals	IEC 60947-5-1
	Width	75mm
	Height	89mm
	Length	16mm

	Sélectionner tout
	Marque Phoenix Contact
	Product Type Interface Relay
	Coil Voltage 12V dc
	Contact Configuration SPDT
	Mount Type DIN Rail
	Series RIF-1-RSC-LDP-12DC/1X21
	Terminal Type Screw
	Switching Current 10mA
	Switching AC Voltage 250V ac
	Coil Current 4.2, 4.5mA
	Switching DC Voltage 250V dc
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 70°C
	Contact Material Silver Alloy
	Standards/Approvals IEC 60947-5-1
	Width 75mm
	Height 89mm
	Length 16mm

This time relay RIF-1-RSC-LDP-12DC/1X21 2908500 from Phoenix Contact is the cost-effective alternative to a PLC; with easy configuration and fast wiring.

Features and Benefits

Pre-assembled relay module

Screw connection

Consists of: relay base, power contact relay, plug-in display/interference suppression module, and retaining bracket

Contact type:1 changeover contact

Time-saving potential distribution, thanks to plug-in bridges

Protection against operating errors due to manual operation that is lockable via screwdriver

Quick and error-free connection to the controller via system cabling

Safety

When working on the products and the system, you must always keep the operating instructions and other items of product documentation to hand and follow them strictly.

Demands on the power supply

Only use power supply units that ensure safe isolation between the primary and secondary circuits according to EN 50178.

Applications

You can use the same electromechanical relay module design for both AC and DC switching module.

Electrical isolation

Voltage adjustment of frequently varying voltage levels

Power amplification

Signal multiplication in the case of relay modules with multiple contacts (e.g., for signal confirmations)

Approvals

IECEx, ATEX and Class 1 Zone 2