Phoenix Contact DIN Rail Interface Relay, 24V dc Coil, 100mA Switching Current, SPST
- N° de stock RS:
- 171-7039
- Référence fabricant:
- 2909884
- Fabricant:
- Phoenix Contact
Sous-total (1 unité)*
10,90 €
(TVA exclue)
13,19 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 8 unité(s) prête(s) à être expédiée(s)
- Plus 5 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 70 unité(s) expédiée(s) à partir du 13 août 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 10,90 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 171-7039
- Référence fabricant:
- 2909884
- Fabricant:
- Phoenix Contact
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Phoenix Contact | |
| Product Type | Interface Relay | |
| Coil Voltage | 24V dc | |
| Contact Configuration | SPST | |
| Mount Type | DIN Rail | |
| Series | RIF-1-RPT-LDP-24DC/1IC | |
| Terminal Type | Screw | |
| Switching Current | 100mA | |
| Length | 16mm | |
| Height | 93mm | |
| Standards/Approvals | IEC 60947-5-1 | |
| Width | 75mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Phoenix Contact | ||
Product Type Interface Relay | ||
Coil Voltage 24V dc | ||
Contact Configuration SPST | ||
Mount Type DIN Rail | ||
Series RIF-1-RPT-LDP-24DC/1IC | ||
Terminal Type Screw | ||
Switching Current 100mA | ||
Length 16mm | ||
Height 93mm | ||
Standards/Approvals IEC 60947-5-1 | ||
Width 75mm | ||
- Pays d'origine :
- CN
Phoenix Contact Interface Relay Module, Screw Terminal, SPDT - RIF-1-RPT-LDP-24DC/1IC - 2909884
Safely couple signals between a PLC (programmable logic controller) and peripherals with this relay from Phoenix Contact. The unit is supplied ready for DIN mounting and includes a base, plug-in interference suppression module and retaining bracket for simple setup.
The relay module accepts both solid and flexible conductors over a wide cross-section range. Its cabling system makes it easy to configure and wire, so connection to your control system can be done quickly. Thanks to reverse polarity protection, it won't be damaged if its outlet is wired incorrectly.
This component has a narrow profile to allow for maximum packing capacity on a circuit board. It's conveniently sealed, which makes it washable. This means you can remove welding flux residue without worrying about solvents affecting the relay's function.
Features and Benefits
• Coil voltage of 24 V AC/DC
• Switching current of 100 mA
• Switching voltage of 250 V AC/DC
• SNPO (single pole, normally open) contact configuration
• Silver alloy contact material
• Life of 30,000,000 cycles
• 1 pole
• Screw Terminal type
• IP20 (ingress protection) rating for protection against solid objects up to 12 mm
• Dimensions of 16 (length) x 93 (height) x 75 mm (depth)
• Operating temperature range of -40°C to +70°C
Liens connexes
- Coral G950-06809-01 for use with Raspberry Pi
- Siemens SIMATIC S7-1200 Series PLC CPU for Use with SIMATIC S7-1200 Series Transistor Output 2
- Carling Technologies Illuminated DPDT, On-(On) Rocker Switch Panel Mount
- SICK Encoder Collets for Use with DBS36E-BBxxxx
- Littelfuse Through Hole Gas Discharge Tube
- Igus GFM-0607-08 6mm Bore Plain Bearing, 7mm O.D
- Raspberry Pi QWERTY (Spain) Raspberry Pi Keyboard
- Coral Google Mini PCIe M.2 Accelerator B/M Development Kit G650-04686-01