Crouzet 10 mm, 24N 17V 1.67mm/s
- N° de stock RS:
- 494-7240
- Référence fabricant:
- 80910502
- Fabricant:
- Crouzet
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau en stock, il n'est plus vendu par le fabricant.
- N° de stock RS:
- 494-7240
- Référence fabricant:
- 80910502
- Fabricant:
- Crouzet
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Crouzet | |
| Product Type | Electrical Linear Actuator | |
| Maximum Load | 24N | |
| Stroke Length | 10mm | |
| Maximum Speed | 1.67mm/s | |
| Voltage | 17V | |
| Series | 809105 | |
| Motor Technology | Stepper Motor | |
| IP Rating | IP40 | |
| Piston Rod Thread | M3 | |
| Minimum Operating Temperature | -5°C | |
| Maximum Operating Temperature | 75°C | |
| Weight | 90g | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Crouzet | ||
Product Type Electrical Linear Actuator | ||
Maximum Load 24N | ||
Stroke Length 10mm | ||
Maximum Speed 1.67mm/s | ||
Voltage 17V | ||
Series 809105 | ||
Motor Technology Stepper Motor | ||
IP Rating IP40 | ||
Piston Rod Thread M3 | ||
Minimum Operating Temperature -5°C | ||
Maximum Operating Temperature 75°C | ||
Weight 90g | ||
Standards/Approvals No | ||
Linear Movement Actuators
A range of stepper or synchronous motors offering linear movement without rotation of the output shaft.
Stepper Motor
Both 4 phase - Unipolar and 2 phase - Bipolar operated motors.
Synchronous Motor
Constant speed 3.33mm/s at 240Vac, 50Hz
Wire Length 250mm +/-10mm
Note
The Synchronous Motor (stock no. 494-7256) requires the use of capacitor, typical stock no. 494-9858.
Liens connexes
- Crouzet 10 mm, 10daN 17 V 1.67mm/s
- Crouzet 10 mm, 10daN 12.7 V 1.67mm/s
- Crouzet 10 mm, 58N 5.6 V 3.33mm/s
- Crouzet 10 mm, 45N 230 V ac 3.33mm/s
- Crouzet Geared DC Geared Motor 12V dc 100rpm, 6 mm Shaft Diameter
- Crouzet Brushed Geared DC Geared Motor 24V dc 208rpm, 8 mm Shaft Diameter
- Crouzet Brushed DC Motor 24V dc 2000rpm, 6 mm Shaft Diameter
- Crouzet Brushed DC Motor 12V dc 2000rpm, 6 mm Shaft Diameter