Festo ELGS, 8083385 Electrical Linear Actuator, 0.25m/s, 300 mm
- N° de stock RS:
- 204-0019
- Numéro d'article Distrelec:
- 301-86-896
- Référence fabricant:
- ELGS-BS-KF-60-300-12P-ST-M-H1-PLK-AA
- Fabricant:
- Festo
Sous-total (1 unité)*
1 291,51 €
(TVA exclue)
1 562,73 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 1 unité(s) prête(s) à être expédiée(s)
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 1 291,51 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 204-0019
- Numéro d'article Distrelec:
- 301-86-896
- Référence fabricant:
- ELGS-BS-KF-60-300-12P-ST-M-H1-PLK-AA
- Fabricant:
- Festo
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Festo | |
| Product Type | Electrical Linear Actuator | |
| Stroke Length | 300mm | |
| Maximum Speed | 0.25m/s | |
| Series | ELGS | |
| Motor Technology | Stepper Motor | |
| Duty Cycle | 100% | |
| IP Rating | IP40 | |
| Guide Type | Ball Bearing | |
| Maximum Operating Temperature | 50°C | |
| Standards/Approvals | RoHS | |
| Sélectionner tout | ||
|---|---|---|
Marque Festo | ||
Product Type Electrical Linear Actuator | ||
Stroke Length 300mm | ||
Maximum Speed 0.25m/s | ||
Series ELGS | ||
Motor Technology Stepper Motor | ||
Duty Cycle 100% | ||
IP Rating IP40 | ||
Guide Type Ball Bearing | ||
Maximum Operating Temperature 50°C | ||
Standards/Approvals RoHS | ||
- Pays d'origine :
- DE
Festo ELGS Series Electrical Linear Actuator, 300mm Stroke Length, 0.25m/s Maximum Speed - ELGS-BS-KF-60-300-12P-ST-M-H1-PLK-AA, Numeric Part Number: 8083385
This electrical linear actuator provides controlled linear motion for automated systems, converting rotary input into precise linear travel for positioning and repeatable movement in industrial settings. It is intended for continuous operation and integrates a motor drive with a guided carriage to move loads along a fixed stroke in machinery and equipment.
Features & Benefits
• 100% duty cycle enables uninterrupted continuous operation
• Ball bearing guided mechanism reduces lateral play and wear
• Stepper motor technology delivers accurate incremental positioning
• 300mm stroke supports medium-range travel requirements
• IP40 enclosure offers protection against solid objects in clean environments
• Maximum speed 0.25 m/s allows predictable motion profiling
• Ball bearing guided mechanism reduces lateral play and wear
• Stepper motor technology delivers accurate incremental positioning
• 300mm stroke supports medium-range travel requirements
• IP40 enclosure offers protection against solid objects in clean environments
• Maximum speed 0.25 m/s allows predictable motion profiling
**Applications**
• Suitable for pick-and-place stations in assembly lines
• Ideal for test rigs requiring repeatable linear positioning
• Used for adjusting tooling or fixtures in machine shops
• Can be used for Camera or sensor alignment in inspection systems
• Suitable for laboratory automation requiring precise travel
• Ideal for test rigs requiring repeatable linear positioning
• Used for adjusting tooling or fixtures in machine shops
• Can be used for Camera or sensor alignment in inspection systems
• Suitable for laboratory automation requiring precise travel
What temperature conditions can it operate under safely?
It is specified for operation up to 50°C, so ambient and local heating should be managed to remain at or below that limit.
How does the guide type affect load handling and accuracy?
The ball bearing guidance provides reduced friction and better lateral stiffness, which helps maintain repeatable positioning under side loads.
What certification or material restriction is indicated for electronic components?
The device complies with RoHS requirements, restricting certain hazardous substances in electrical and electronic equipment.
How should users approach speed and motion planning for integration?
Motion profiles should not exceed the maximum travel speed of 0.25 m/s
control inputs must match the stepper motor drive characteristics for smooth acceleration and deceleration.