Festo ELGT, 8124452 Electrical Linear Actuator, 0.5m/s, 350 mm
- N° de stock RS:
- 194-614
- Référence fabricant:
- ELGT-BS-120-350-10P
- Fabricant:
- Festo
Sous-total (1 unité)*
2 366,72 €
(TVA exclue)
2 863,73 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stocké-e par le fabricant
- Prêt à être expédié à partir du 08 juillet 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 2 366,72 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 194-614
- Référence fabricant:
- ELGT-BS-120-350-10P
- Fabricant:
- Festo
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Festo | |
| Product Type | Electrical Linear Actuator | |
| Stroke Length | 350mm | |
| Maximum Speed | 0.5m/s | |
| Series | ELGT | |
| Motor Technology | Servo Motor, Stepper Motor | |
| Duty Cycle | 100% | |
| IP Rating | IP20 | |
| Guide Type | Ball Bearing | |
| Maximum Operating Temperature | 50°C | |
| Standards/Approvals | RoHS, ISO 146441, VDMA464 | |
| Sélectionner tout | ||
|---|---|---|
Marque Festo | ||
Product Type Electrical Linear Actuator | ||
Stroke Length 350mm | ||
Maximum Speed 0.5m/s | ||
Series ELGT | ||
Motor Technology Servo Motor, Stepper Motor | ||
Duty Cycle 100% | ||
IP Rating IP20 | ||
Guide Type Ball Bearing | ||
Maximum Operating Temperature 50°C | ||
Standards/Approvals RoHS, ISO 146441, VDMA464 | ||
- Pays d'origine :
- CN
Festo ELGT Series Electrical Linear Actuator, 350mm Stroke Length, 100% Duty Cycle - ELGT-BS-120-350-10P, Numeric Part Number:8124452
This electrical linear actuator provides precise linear motion control for automation and mechanical systems. Designed for continuous operation in industrial settings, it combines guided carriage movement with selectable motor types to drive repeatable strokes up to a medium travel length. The device is intended for integration where controlled, high-frequency actuation is required within temperature-limited environments.
Features and Benefits:
• 100% duty cycle for continuous operation under load
• Ball bearing guidance reduces friction and improves positional stability
• Maximum speed 0.5m/s enables Rapid cycle response
• Stroke length 350mm permits medium-range linear travel
• IP20 protection suitable for clean, indoor installations
• Compatible with servo and stepper motors for control flexibility
• Ball bearing guidance reduces friction and improves positional stability
• Maximum speed 0.5m/s enables Rapid cycle response
• Stroke length 350mm permits medium-range linear travel
• IP20 protection suitable for clean, indoor installations
• Compatible with servo and stepper motors for control flexibility
Applications
• Suitable for pick-and-place modules in assembly automation
• Ideal for indexing tables requiring frequent linear shifts
• Used for valve actuation in electrical control systems
• Can be used for positioning stages in test and measurement rigs
• Used with robotic end-effectors for linear offset movements
• Ideal for indexing tables requiring frequent linear shifts
• Used for valve actuation in electrical control systems
• Can be used for positioning stages in test and measurement rigs
• Used with robotic end-effectors for linear offset movements
What ambient temperature range can it operate within?
It is rated for continuous use up to a maximum ambient temperature of 50°C, making it suitable for typical production‑floor environments.
Which guide mechanism ensures repeatable motion accuracy?
A ball bearing guide system provides low‑friction linear guidance, enhancing repeatability and reducing wear on the carriage.
What motor options are available for motion control?
It accepts both servo and stepper drive technologies, allowing either closed‑loop precision or open‑loop stepwise control depending on system needs.
Are there design standards relevant to its manufacture?
The unit is produced in accordance with recognised standards including RoHS and industry‑specific guidelines for cleanroom and mechanical systems.