RS PRO Carbide Tip 1 SDS-Max 14 mm, 390 mm Overall
- N° de stock RS:
- 511-9727
- Fabricant:
- RS PRO
Sous-total (1 unité)*
26,47 €
(TVA exclue)
32,03 €
(TVA incluse)
Informations sur le stock actuellement non accessibles - Veuillez vérifier plus tard
Unité | Prix par unité |
|---|---|
| 1 + | 26,47 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 511-9727
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Product Type | Drill Bit | |
| Material | Carbide Tip | |
| Sub Type | SDS-Max | |
| Overall Length | 390mm | |
| Number of Pieces | 1 | |
| Drill Point Diameter | 14mm | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Product Type Drill Bit | ||
Material Carbide Tip | ||
Sub Type SDS-Max | ||
Overall Length 390mm | ||
Number of Pieces 1 | ||
Drill Point Diameter 14mm | ||
Standards/Approvals No | ||
Statut RoHS : Exempté
RS PRO Carbide-Tipped SDS Drill Bit, 14 mm x 390 mm
Need to drill into hard or abrasive materials like stone and cement? Use this RS PRO Slotted Drive System (SDS) drill bit. It has a carbide tip, which allows for sharp and accurate drilling, even into masonry and concrete.
Carbide tools are highly resistant to abrasion and can withstand very high temperatures. This makes them ideal for drilling through tough materials. The strength and durability of the carbide ensure you'll still end up with a sharp tip on the drill bit, as well as a clean, smooth finish on the cut.
This drill bit has spiral fluting along the lead, resulting in a continuous and efficient drilling motion. The flutes allow any debris to remove itself from the cutting path, so you can drill unimpeded. For a safe and secure fit, use this drill bit with an SDS-MAX fitting shank.
Features and Benefits
• Diameter of 14 mm
• SDS drill bit type
• Not hammer capable
• Carbide-tipped material
• Overall length of 390 mm
• SDS-Max type
Liens connexes
- RS PRO Carbide Tip 1 SDS-Max 18 mm, 390 mm Overall
- RS PRO Carbide Tip 1 SDS-Max 12 mm, 390 mm Overall
- RS PRO Carbide Tip 1 SDS-Max 16 mm, 390 mm Overall
- RS PRO Carbide Tip 1 SDS-Max 14 mm, 540 mm Overall
- RS PRO Carbide Tip 1 SDS-Max 20 mm, 520 mm Overall
- RS PRO Carbide Tip 1 SDS-Max 30 mm, 570 mm Overall
- RS PRO Carbide Tip 1 SDS-Max 28 mm, 37 mm Overall
- RS PRO Carbide Tip 1 SDS-Max 12 mm, 540 mm Overall