RS PRO Black Ethylene Propylene Diene Monomer Edge Protection, 20 m
- N° de stock RS:
- 175-2567
- Fabricant:
- RS PRO
Sous-total (1 bobine de 20 mètres)*
187,97 €
(TVA exclue)
227,44 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 7 unité(s) expédiée(s) à partir du 07 septembre 2026
- Plus 27 unité(s) expédiée(s) à partir du 07 septembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Bobine(s) | la bobine | le mètre* |
|---|---|---|
| 1 + | 187,97 € | 9,399 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 175-2567
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Length | 20m | |
| Insert Type | D-Type | |
| Width | 14.8mm | |
| Height | 14.9mm | |
| Material | Ethylene Propylene Diene Monomer | |
| Product Type | Edge Protection | |
| Sub Type | Edge Protection | |
| Colour | Black | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Length 20m | ||
Insert Type D-Type | ||
Width 14.8mm | ||
Height 14.9mm | ||
Material Ethylene Propylene Diene Monomer | ||
Product Type Edge Protection | ||
Sub Type Edge Protection | ||
Colour Black | ||
Standards/Approvals No | ||
- Pays d'origine :
- GB
RS PRO Black Brush Strip, 20 m x 15 mm x 14.8 mm
Soften the edges of sharp metal panels with this brush strip from RS PRO. In addition to doors and cabinets, you can also attach it to exposed metal areas on car frames to protect them from wear as well as prevent nearby components from getting damaged.
The strip is composed of robust rubber, which absorbs vibration and in turn helps slow down wear-and-tear. This prevents actions such as the opening and closing of a car door from affecting the metal sheets. A steel wire inside the strip offers reinforcement to ensure it stays in place. It has grooved inner rubber clamps so you can manually fit the strip to panels with very little effort.
As this seal can be exposed to temperatures of up +120°C, it's suitable to use with hot industrial machinery. It's been sulphur-cured to enhance its longevity for a long working life.
Features and Benefits
• Black colour
• Made from EPDM (ethylene propylene diene monomer) sponge rubber
• Height of 15 mm
• Length of 20 m
• Width of 14.8 mm
Liens connexes
- RS PRO Black Ethylene Propylene Diene Monomer Edge Protection, 20 m
- RS PRO Black Ethylene Propylene Diene Monomer Edge Protection, 10 m
- RS PRO Black Ethylene Propylene Diene Monomer Edging Strip, 20 m
- RS PRO Ethylene Propylene Diene Monomer Ethylene Propylene Diene Monomer 20 mm ID Black, 20 m
- RS PRO Ethylene Propylene Diene Monomer Ethylene Propylene Diene Monomer 19 mm ID Blue, 20 m
- RS PRO Ethylene Propylene Diene Monomer Ethylene Propylene Diene Monomer 19 mm ID Red, 20 m
- RS PRO Ethylene Propylene Diene Monomer Ethylene Propylene Diene Monomer 13 mm ID Blue, 20 m
- RS PRO Ethylene Propylene Diene Monomer Ethylene Propylene Diene Monomer 25 mm ID Red, 20 m