Références fabricant

Phoenix Contact Distribution Block, 7 Way, 500 V, 41A, Grey

N° de stock RS:: 136-3237
Numéro d'article Distrelec:: 304-30-783
Référence fabricant:: 3273460
Fabricant:: Phoenix Contact

Phoenix Contact Distribution Block, 7 Way, 500 V, 41A, Grey

Sous-total (1 boîte de 10 unités)*

37,95 €

(TVA exclue)

45,92 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 75,00 €

En stock

5 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Boîte(s)	La Boite	Prix par unité*
1 +	37,95 €	3,795 €

*Prix donné à titre indicatif

N° de stock RS:: 136-3237
Numéro d'article Distrelec:: 304-30-783
Référence fabricant:: 3273460
Fabricant:: Phoenix Contact

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Phoenix Contact
	Number of Ways	7
	Product Type	Distribution Block
	Current	41A
	Housing Material	Polyamide
	Voltage	500 V
	Wire Size - Line Side	26 AWG
	Minimum Operating Temperature	-35°C
	Wire Size - Load Side	26 AWG
	Colour	Grey
	Width	25.2 mm
	Length	28.2mm
	Height	21.2mm
	Standards/Approvals	RoHS
	Series	PTFIX
	Maximum Operating Temperature	105°C

	Sélectionner tout
	Marque Phoenix Contact
	Number of Ways 7
	Product Type Distribution Block
	Current 41A
	Housing Material Polyamide
	Voltage 500 V
	Wire Size - Line Side 26 AWG
	Minimum Operating Temperature -35°C
	Wire Size - Load Side 26 AWG
	Colour Grey
	Width 25.2 mm
	Length 28.2mm
	Height 21.2mm
	Standards/Approvals RoHS
	Series PTFIX
	Maximum Operating Temperature 105°C

Se connecter pour voir les modèles CAO

Pays d'origine :: PL

Phoenix Contact Grey Distribution Block, 7-Way, 24 A - PTFIX 6/6X2,5-G GY - 3273460

Use this 7-way distribution Block from Phoenix Contact to distribute power from a single input source to various devices. It has a housing MADE of a Durable polyamide material that's heat and corrosion-resistant, making it a good choice for use in demanding industrial environments. This material also has excellent insulation properties, so it protects you and your equipment against electrical hazards.

The component comes ready to use thanks to its push-in termination technology. To connect your devices with minimal effort, you can simply plug your conductors into the terminals without using any specialist tools. The unit also offers a variety of mounting options – clip it onto your DIN rail or use adhesive to install it on an electrical panel. You'll find blocks such as this in a range of settings, from motorhomes to domestic set-ups and commercial environments.

• Cable cross-sectional area (CSA) of 0.14 to 4 mm²

• Grey in colour

• Current rating of 24 A, 41 A at 6 mm²

• Not fused

• Voltage rating of 500 V

• Wire size of 26 to 12 AWG (American Wire Gauge)

PTFIX Distribution Blocks

Phoenix Contact PTFIX series distribution blocks with push in connection offer a flexible distribution solution with different numbers of positions and mounting options. They can be used straight away and expanded as needed. Simply unpack, connect, and you are done.

Features and Benefits

Push in connection

Voltage: 500 V

Current: 24 A

Variants in 1.5 mm² and 2.5 mm²

2.5 mm² power blocks with additional 6 mm² Terminal point

Number of Terminal points: 6, 12 and 18

Can be bridged and aligned with standard plug-in bridges

Testing option for all common test probes

Push-In Connection Terminal Blocks

The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm² and up.