STMicroelectronics BiCMOS Constant Current Source, 0.5 A PWM
- N° de stock RS:
- 188-9388
- Référence fabricant:
- STCS05ADR
- Fabricant:
- STMicroelectronics
Sous-total (1 unité)*
1,33 €
(TVA exclue)
1,61 €
(TVA incluse)
Ajouter 57 unités pour bénéficier d'une livraison gratuite
En stock
- 777 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 1,33 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 188-9388
- Référence fabricant:
- STCS05ADR
- Fabricant:
- STMicroelectronics
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | STMicroelectronics | |
| Product Type | Display Driver | |
| Input Voltage | 4.5 to 40 V | |
| Mount Type | Surface Mount | |
| Sub Type | BiCMOS Constant Current Source | |
| Dimming Operation | PWM | |
| Input Voltage Type | DC | |
| Terminal Type | Solder | |
| Driver Current | 0.5 A | |
| Operating Modes | Shutdown, ON | |
| LED Voltage | 40 V | |
| Standards/Approvals | ECOPACK, JESD97 | |
| Number of Outputs | 5 | |
| Series | STCS05A | |
| Configuration | Vertical | |
| Power Dissipation | 0.85W | |
| Primary Type | Constant Current LED driver | |
| Sélectionner tout | ||
|---|---|---|
Marque STMicroelectronics | ||
Product Type Display Driver | ||
Input Voltage 4.5 to 40 V | ||
Mount Type Surface Mount | ||
Sub Type BiCMOS Constant Current Source | ||
Dimming Operation PWM | ||
Input Voltage Type DC | ||
Terminal Type Solder | ||
Driver Current 0.5 A | ||
Operating Modes Shutdown, ON | ||
LED Voltage 40 V | ||
Standards/Approvals ECOPACK, JESD97 | ||
Number of Outputs 5 | ||
Series STCS05A | ||
Configuration Vertical | ||
Power Dissipation 0.85W | ||
Primary Type Constant Current LED driver | ||
The STCS05A is a BiCMOS constant current source designed to provide a precise constant current starting from a varying input voltage source. The main target is to replace discrete components solution for driving LEDs in low voltage applications such as 5 V, 12 V or 24 V giving benefits in terms of precision, integration and reliability. The current is set with external resistor up to 0.5 A with a ± 10 % precision, a dedicated pin allows implementing PWM dimming. An external capacitor allows setting the slope for the current rise from tens of microseconds to tens of milliseconds allowing reduction of EMI. An open-drain pin output provides information on load disconnection condition.
Slope control with external cap
LED disconnection diagnostic
Up to 40 V input voltage
Up to 0.5 A output current
Less than 0.5 V voltage overhead
Shutdown pin
PWM dimming pin
Applications
LED constant current supplying for varying input voltages
Low voltage lighting
Small appliances LED lighting
Car LED lights