Adafruit 1770, TFT LCD Display 2.8in Resistive Touch Screen Display Module With MicroSD Socket - ILI9341
- N° de stock RS:
- 124-5469
- Référence fabricant:
- 1770
- Fabricant:
- ADAFRUIT INDUSTRIES
Sous-total (1 unité)*
30,46 €
(TVA exclue)
36,86 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 6 unité(s) prête(s) à être expédiée(s)
- Plus 53 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 30,46 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 124-5469
- Référence fabricant:
- 1770
- Fabricant:
- ADAFRUIT INDUSTRIES
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | ADAFRUIT INDUSTRIES | |
| Diagonal Display Size | 2.8in | |
| Display Technology | Resistive Touch Screen | |
| Kit Classification | Display Module | |
| Kit Name | TFT LCD Display | |
| Featured Device | MicroSD Socket - ILI9341 | |
| Sélectionner tout | ||
|---|---|---|
Marque ADAFRUIT INDUSTRIES | ||
Diagonal Display Size 2.8in | ||
Display Technology Resistive Touch Screen | ||
Kit Classification Display Module | ||
Kit Name TFT LCD Display | ||
Featured Device MicroSD Socket - ILI9341 | ||
Adafruit 2.8 inch TFT LCD Touchscreen Breakout Board with microSD Socket
This colour 2.8 TFT display has 4 bright white LED backlight and 240 x 320 pixels with individual RGB pixel control. It has a resistive touchscreen to detect finger presses anywhere on the screen. The built-in controller has RAM buffering to take the workload away from the microcontroller. This display board has two modes: 8-bit and SPI.
When using 8-bit mode, you need 8 digital data lines and 4 or 5 digital control lines to read and write to the display.
SPI mode requires only 5 pins total (SPI data in, data out, clock, select, and dc) but is slower than 8-bit mode.
In addition, 4 pins are required for the touch screen (2 digital, 2 analogue).
It is 3 V to 5 V compliant with high-speed level shifters so you can use with any microcontroller. If you are using SPI mode, you can also take advantage of the on-board micro-SD card socket.
When using 8-bit mode, you need 8 digital data lines and 4 or 5 digital control lines to read and write to the display.
SPI mode requires only 5 pins total (SPI data in, data out, clock, select, and dc) but is slower than 8-bit mode.
In addition, 4 pins are required for the touch screen (2 digital, 2 analogue).
It is 3 V to 5 V compliant with high-speed level shifters so you can use with any microcontroller. If you are using SPI mode, you can also take advantage of the on-board micro-SD card socket.
- 3.3 V @ 150 mA LDO regulator
- 4 white LED backlight, transistor connected so you can use PWM to dim the backlight
- 1 x 20 headers for easy breadboarding
- 4-wire resistive touchscreen
- Thickness: 7.9 mm / 0.3"
- Weight: 40 g
- 4 white LED backlight, transistor connected so you can use PWM to dim the backlight
- 1 x 20 headers for easy breadboarding
- 4-wire resistive touchscreen
- Thickness: 7.9 mm / 0.3"
- Weight: 40 g
Adafruit LCD Touchscreens
Liens connexes
- Adafruit 2478, TFT LCD Display 2.4in Resistive Touch Screen Display Module for MicroSD Socket - ILI9341
- Display Visions EA uniTFTs028-ATC TFT TFT LCD Display / Touch Screen 320 x 240pixels
- Display Visions EA TFT028-23AITC TFT TFT LCD Display / Touch Screen 240 x 320pixels
- Display Visions EA TFT028-23AINN TFT TFT LCD Display / Touch Screen 240 x 320pixels
- MikroElektronika MIKROE-1142 compatible with GLCD 128x64
- Displaytech DT028BTFT-TS TFT TFT LCD Display / Touch Screen 240 x 320pixels
- MikroElektronika MIKROE-1404 TFT TFT LCD Display / Touch Screen 320 x 240pixels
- 4D Systems, gen4 2.8in Arduino Compatible Display with Resistive Touch Screen
