PULS DIMENSION Switched Mode DIN Rail Power Supply 240V ac AC Input 28V dc, 20 A Output DC 480 W
- N° de stock RS:
- 670-0677
- Numéro d'article Distrelec:
- 169-96-533
- Référence fabricant:
- QS20.241
- Fabricant:
- PULS
Sous-total (1 unité)*
383,56 €
(TVA exclue)
464,11 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- 13 unité(s) expédiée(s) à partir du 09 juillet 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 383,56 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 670-0677
- Numéro d'article Distrelec:
- 169-96-533
- Référence fabricant:
- QS20.241
- Fabricant:
- PULS
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | PULS | |
| Product Type | DIN Rail Power Supply | |
| Series | DIMENSION | |
| Maximum Output Voltage | 28V dc | |
| Sub Type | Switched Mode | |
| Electrical Phase | 1 | |
| Input Voltage Type | AC | |
| Number of Outputs | 1 | |
| Power | 480W | |
| Output Current | 20A | |
| IP Rating | IP20 | |
| Output Voltage Type | DC | |
| Minimum Operating Temperature | -25°C | |
| Maximum Operating Temperature | 70°C | |
| Width | 82mm | |
| Depth | 127mm | |
| Height | 124mm | |
| Standards/Approvals | No | |
| Hazardous Area Certification | NO | |
| Maximum Input Voltage | 240V ac | |
| Minimum Input Voltage | 100V ac | |
| Sélectionner tout | ||
|---|---|---|
Marque PULS | ||
Product Type DIN Rail Power Supply | ||
Series DIMENSION | ||
Maximum Output Voltage 28V dc | ||
Sub Type Switched Mode | ||
Electrical Phase 1 | ||
Input Voltage Type AC | ||
Number of Outputs 1 | ||
Power 480W | ||
Output Current 20A | ||
IP Rating IP20 | ||
Output Voltage Type DC | ||
Minimum Operating Temperature -25°C | ||
Maximum Operating Temperature 70°C | ||
Width 82mm | ||
Depth 127mm | ||
Height 124mm | ||
Standards/Approvals No | ||
Hazardous Area Certification NO | ||
Maximum Input Voltage 240V ac | ||
Minimum Input Voltage 100V ac | ||
- Pays d'origine :
- CZ
PULS DIN Rail Power Supply
The PULS DIMENSION Q series single-phase DIN-rail switch-mode power supply has an adjustable output voltage ranging between 24VDC and 28VDC with 20A current. This cost-optimised power supply is specifically designed with uncompromised quality and reliability for high-performance. This unit is equipped with an input voltage ranging between 100VAC and 240VAC. This power supplies diagnostic is easy due to the dry DC-ok contact, a green DC-ok LED and red overload LED.
Features and Benefits
Light and compact
Easy to install
Quick-connect spring-clamp terminals
Efficiency is up to 93.9%
Power rating is 480W
Ripple factor and noise is 100mVpp
Active power factor correction (PFC)
Negligible low inrush current surge
DC-OK signal with relay
50% power reserves available up to 4s
Operation temperature ranges between -25°C and 70°C
Applications
Industrial control
Automation
Communication and instrumentation equipment
Certifications
IEC
UL approved
EN
SELV
Liens connexes
- PULS DIMENSION Switched Mode DIN Rail Power Supply 240V ac AC Input 28V dc, 20 A Output DC 480 W
- PULS DIMENSION Switched Mode DIN Rail Power Supply 480V ac AC Input 28V dc, 40 A Output DC 960 W
- PULS DIMENSION Switched Mode DIN Rail Power Supply 240V ac AC Input 28V dc, 40 A Output DC 960 W
- PULS DIMENSION Switched Mode DIN Rail Power Supply 480V ac AC Input 28V dc, 10 A Output DC 240 W
- PULS DIMENSION Switched Mode DIN Rail Power Supply 480V ac AC Input 28V dc, 5 A Output DC 120 W
- PULS DIMENSION Switched Mode DIN Rail Power Supply 240V ac AC Input 28V dc, 3.3 A Output DC 80 W
- PULS DIMENSION Switched Mode DIN Rail Power Supply 480V ac AC Input 28V dc, 20 A Output DC 480 W
- PULS DIMENSION Switched Mode DIN Rail Power Supply 240V ac AC Input 28V dc, 10 A Output DC 240 W