Hirschmann, NR 12 Pole Straight Standard DIN Plug, DIN 43651, 5A, 60V ac IP65, Cable Male
- N° de stock RS:
- 279-9099
- Référence fabricant:
- 932631106 N11R EM
- Fabricant:
- Hirschmann
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 279-9099
- Référence fabricant:
- 932631106 N11R EM
- Fabricant:
- Hirschmann
Spécifications
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Hirschmann | |
| Product Type | DIN Plug | |
| Number of Contacts | 12 | |
| Mount Type | Cable | |
| Current | 5A | |
| Connector Size | Standard | |
| Connector Gender | Male | |
| Orientation | Straight | |
| Voltage | 60V ac | |
| IP Rating | IP65 | |
| Termination Type | Crimp | |
| Minimum Operating Temperature | -40°C | |
| Contact Gender | Male | |
| Maximum Operating Temperature | 90°C | |
| DIN Number | DIN 43651 | |
| Series | NR | |
| Standards/Approvals | No | |
| Housing Material | Polyethylene Terephthalate | |
| Pole Format | 11+PE | |
| Contact Material | Polyethylene Terephthalate | |
| Contact Plating | Silver | |
| Sélectionner tout | ||
|---|---|---|
Marque Hirschmann | ||
Product Type DIN Plug | ||
Number of Contacts 12 | ||
Mount Type Cable | ||
Current 5A | ||
Connector Size Standard | ||
Connector Gender Male | ||
Orientation Straight | ||
Voltage 60V ac | ||
IP Rating IP65 | ||
Termination Type Crimp | ||
Minimum Operating Temperature -40°C | ||
Contact Gender Male | ||
Maximum Operating Temperature 90°C | ||
DIN Number DIN 43651 | ||
Series NR | ||
Standards/Approvals No | ||
Housing Material Polyethylene Terephthalate | ||
Pole Format 11+PE | ||
Contact Material Polyethylene Terephthalate | ||
Contact Plating Silver | ||
- Pays d'origine :
- DE
Belden Hirschmann DIN Plug, Straight Body Orientation, 28mm Diameter - NR Series - 932631106 N11R EM
Grab this DIN plug from Belden's Hirschmann range to make reliable joins between devices in your industrial system. Its 12 poles establish a highly-conductive route to get your signal from A to B in no time. The unit's plastic housing is reinforced with glass fibre, so shrugs off bumps, scuffs and contaminants without missing a beat. Use the manual crimp termination method to create a permanent attachment that's gas-tight and stops contaminants from sneaking through.
Features & Benefits
• Silver-plated contacts resist corrosion, ensuring efficient signal transfer
• Voltage rating of 60V AC/DC suits low-power applications
• IP65 rating means it's completely dust-tight and withstands temporary immersion in 1m of water
Applications
• Remote sensing devices
• Pump drives and transmissions
• Industrial automation
Can I use this device in challenging conditions?
Yes. The plug gets on with its job reliably in a temperature range between -40°C and +90°C, so it's not fazed by demanding environments.
Liens connexes
- Hirschmann DIN 43651 60V ac IP65, Cable Female
- Hirschmann DIN 43651 250 V ac Screw, Panel Mount Female
- Hirschmann DIN 43651 250V ac IP65 Screw, Cable Female
- Hirschmann Circular Connector Panel Mount Plug IP65, NR Series
- Hirschmann DIN 43651 250V ac IP65, Panel Mount Male
- Hirschmann DIN 43651 250 V ac Cable Male
- Hirschmann Test & Measurement Black Grabber Clip 60V dc 4 mm Socket
- Lumberg 8 Pole DIN Plug 5A Wall Mount